Differences
This shows you the differences between the selected revision and the current version of the page.
| howto:ffp-reloaded 2008/10/05 21:45 | howto:ffp-reloaded 2017/12/04 19:31 current | ||
|---|---|---|---|
| Line 7: | Line 7: | ||
| You should install the latest busybox package (>= 1.11.1). | You should install the latest busybox package (>= 1.11.1). | ||
| - | This does **not** work out-of-the-box with RAID. You will have to know what you're doing to get it working. | + | This does **not** work out-of-the-box with RAID. You will have to know what you're doing to get it working. See the [[#RAID Reloaded]] section for some pointers. |
| + | |||
| + | For now, the supplied 2.6.25 kernel doesn't work with Rev B1, because the vanilia kernel doesn't support rev B1. However, you can use a 2.6.12 kernel from the [[http://www.inreto.de/dns323/misc/|firmware-reloaded archive in the misc/]] section of fonz's software repository. | ||
| - | For now, it doesn't work with Rev B1, because the vanilia kernel doesn't support rev B1. | ||
| ==== Installation ==== | ==== Installation ==== | ||
| Line 37: | Line 39: | ||
| ln -s /proc/mounts ffp/etc/mtab | ln -s /proc/mounts ffp/etc/mtab | ||
| mkdir -p proc sys | mkdir -p proc sys | ||
| + | </code> | ||
| + | |||
| + | NOTE: if you want to use optware afterwards you need to make sure that you are using the same libraries used with the base fun_plug. If you don't you may get (with xmail, for example) a complaint about a missing symbol in6addr_any. To resolve this, do the following: | ||
| + | |||
| + | <code> | ||
| + | cd /lib | ||
| + | rm /mnt/HD_a2/lib # remove symbolic link created above | ||
| + | tar cf - * | (cd /mnt/HD_a2; tar xvf -) | ||
| </code> | </code> | ||
| Line 69: | Line 79: | ||
| uname -a | uname -a | ||
| </code> | </code> | ||
| + | |||
| + | |||
| + | |||
| + | ==== RAID Reloaded ==== | ||
| + | If you don't care about the features in the D-Link firmware, and are confident with using [[http://www.inreto.de/dns323/fun-plug/0.5/|fun-plug 0.5]], you can join the "reloaded" fun using: | ||
| + | |||
| + | * fonz's [[http://www.inreto.de/dns323/misc/|custom 2.6.12 firmware-reloaded kernel]] | ||
| + | * fun-plug 0.5 installed to ''/mnt/HD_a4'' **or** ''/mnt/HD_b4'' (which correspond to the ``sda4`` and ``sdb4`` partitions) | ||
| + | * ffp-reloaded from [[http://www.inreto.de/dns323/fun-plug/0.5/extra-packages/ffp-reloaded/|extra-packages]] | ||
| + | * mdadm. You'll need to run the following **after** reloading: | ||
| + | <code> | ||
| + | mdadm -A /dev/md0 /dev/sda2 /dev/sdb2 | ||
| + | </code> | ||
| + | |||
| + | Be sure to tweak ''/ffp/boot/boot.sh'' to pass ''-m 526'' to ''reload.sh''. This is necessary when booting the 2.6.12 kernel. Here is my ''boot.sh'': | ||
| + | |||
| + | <code> | ||
| + | #!/bin/sh | ||
| + | set -x | ||
| + | cd /ffp/boot | ||
| + | ./reload.sh -I root=/dev/sdb4 -m 526 | ||
| + | </code> | ||
| + | |||
| + | With this setup, I have my Rev B1 DNS-323 reloading into fun-plug 0.5, with RAID1 enabled, and running the NFS **kernel** server. | ||
| + | |||
| Line 79: | Line 114: | ||
| + | * Mijzelf made it work on the NSA-220 [[http://forum.dsmg600.info/viewtopic.php?pid=32398#p32398]] | ||
