Differences

This shows you the differences between the selected revision and the current version of the page.

--- howto:lighttpd_php 2007/12/16 18:49
+++ howto:lighttpd_php 2017/09/06 18:38 current
@@ Line 1: / Line 1: @@
 ====== HOWTO Build lighttpd ======
-First, set up your [[crosscompile]] toolchain. Download {{:howto:build_lighttpd_pa1.tgz}}. Extract, edit the file to correct the bug in **tar xvfz zips/.tar.gz --> tar xvfz zips/$APP-$APP_VER.tar.gz** and then execute.
+First, set up your [[crosscompile]] toolchain. Download {{:howto:build_lighttpd_pa1.tgz}}. Extract, edit the file to correct the bug in **tar xvfz zips/.tar.gz --> tar xvzf zips/$APP-$APP_VER.tar.gz** and then execute.
+Quick helper: Also note that you need to create a /zips/ folder (or add it to the above script right after [if ! -f zips ]), otherwise the script breaks
 Transfer the result, dns323_lighttpd-1.4.13.tar.gz, to /mnt/HD_a2 and extract it ''lnx_bin/busybox3 tar xvz -f dns323_lighttpd-1.4.13.tar.gz''
@@ Line 28: / Line 30: @@
 Access your server on port 3000, e.g. ''http://192.168.0.200:3000/index.html''
@@ Line 35: / Line 38: @@
 ===== Note on lighttpd version =====
 Beginning with 1.5.0, lighttpd depends on glib2.
+===== Notes on using port 80 for lighttpd =====
+For fun-plug v0.5 click [[http://wiki.dns323.info/howto:ffp#lighttpd_web_server|here]] and look for **Port 80** for fun-plug versions 0.3 & 0.4 see below...
+Since the DNS-323 Admin service (webs) uses port 80 in order to use port 80 for lighttpd you'll need to do the following:
+  - Modify ligttpd.conf file to include "server.port = 80"
+  - Stop the lighttpd service
+  - Stop the 'webs' service
+  - Start the lighttpd service
+or use the two scripts below and make sure you put them in ./fun_plug.d/start directory with the correct CHMOD settings so they run automatically.
+The admin service on your DNS-323 will now be available on port 81. To access: ''http://192.168.0.200:81''
+Here's the 'lighttpd.sh' script:
+<code>
+#!/bin/sh
+#
+# This script was modified by Paul on 2/2/08 as a work around
+# in getting the admin website off of port 80 and on to port 81
+# It is used in conjuction with admwebs.sh (created) which is
+# called from this script. lighttpd.sh stops (via admwebs.sh) the
+# web admin service and then starts lighttpd on port 80. The web admin
+# now (automatically) starts on port 81 after a few seconds. The admin
+# service tests for use on port 80. If it's in use then bumps to the
+# next available port (in this case it's bumped to port 81).
+#
+# NOTE:
+# ./fun_plug.d/etc/lighttpd.conf needs to be configured to use
+# port 80
+#
+# USE "netstat -tln" to verify that both port 80 & 81 are in use.
+#
+lighttpd_start() {
+    # make sure, upload directory exists
+    # path must match server.upload-dirs in lighttpd.conf file!
+    mkdir -p ${VOL1}/tmp
+    chmod 01777 ${VOL1}/tmp
+    if [ -x "${SBINDIR}/lighttpd" ]; then
+        echo "Stopping WEB admin"
+        /mnt/HD_a2/fun_plug.d/start/admwebs.sh stop
+        echo "Starting lighttpd... "
+        ${SBINDIR}/lighttpd -f ${ETCDIR}/lighttpd.conf 1>/dev/null 2>/dev/null </dev/null
+        echo "Starting WEB admin on port 81"
+        /mnt/HD_a2/fun_plug.d/start/admwebs.sh start
+        echo "done!"
+    else
+        echo "ERROR: lighttpd not found or not executable"
+    fi
+}
+lighttpd_stop() {
+    killall lighttpd
+}
+lighttpd_status() {
+    if [ -n "$(pidof lighttpd)" ]; then
+        echo "running"
+    else
+        echo "stopped"
+    fi
+}
+case "$1" in
+    stop)
+        lighttpd_stop
+        ;;
+    restart)
+        lighttpd_stop
+        sleep 1
+        lighttpd_start
+        ;;
+    status)
+        lighttpd_status
+        ;;
+    start|'')
+        lighttpd_start
+        ;;
+    *)
+        echo "Usage: $0 start|stop|restart|status"
+        ;;
+esac
+</code>
+Here's the 'admwebs.sh' script:
+<code>
+#!/bin/sh
+#
+# This script was created by Paul on 2/2/08 as a work around
+# in getting the admin website off of port 80 and on to port 81
+# It is used in conjuction with lighttpd.sh (also modified) which
+# calls this script. When used from lighttpd.sh it stops the
+# web admin service then starts lighttpd on port 80. The web admin
+# service notices that something is on port 80 and then starts on
+# port 81.
+#
+# NOTE:
+# ./fun_plug.d/etc/lighttpd.conf needs to be configured to use
+# port 80
+#
+# NOTE2: (2/14/08)
+#  Updated this script to remove "Starting" webs. Apparently
+#  if you start webs you will not be able to add users
+#  webs is set to automatically restart if the /web/webs service
+#  is stopped.
+#
+admwebs_start() {
+    if [ -x "/web/webs" ]; then
+#       echo "Starting webs... "
+#       /web/webs & > /dev/null
+        echo "/webs/webs service will start automatically in 45 sec"
+    else
+        echo "ERROR: /web/webs not found or not executable"
+    fi
+}
+admwebs_stop() {
+    killall webs
+}
+admwebs_status() {
+    if [ -n "$(pidof webs)" ]; then
+        echo "running"
+    else
+        echo "stopped"
+    fi
+}
+case "$1" in
+    stop)
+        admwebs_stop
+        ;;
+    restart)
+        admwebs_stop
+        sleep 1
+        admwebs_start
+        ;;
+    status)
+        admwebs_status
+        ;;
+    start|'')
+        admwebs_start
+        ;;
+    *)
+        echo "Usage: $0 start|stop|restart|status"
+        ;;
+esac
+</code>
@@ Line 40: / Line 200: @@
   * A pre-compiled variant can be found {{:howto:dns323_lighttpd-1.4.13.tar.gz|here}}
   * lighttpd is also included in [[http://www.inreto.de/dns323/fun-plug/|fonz's fun_plug pack]], a comprehensive fun_plug package that's easy to implement and great for first time users. php is a separate package that can be added easily. Instructions are provided.
+=====  Lighttpd for Windows Users =====
+if you don't speak linux gibberish:
+Before you begin:
+Install Putty on your PC: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
+Install Netscan on your PC: http://www.softperfect.com/products/networkscanner/
+Run Netscan. click the Options tab, then the Additional subtab. Click all the buttons. in the box on the bottom type 22, 23, 80, 443, 8080. Click OK.
+Click the IP box, then click the range of your network in the box that pops up.
+these files must be in these locations in Volume_1 of the DNS-323:
+//lighttpd.sh in /ffp/start//
+//lighttpd.conf in ffp/etc/examples//
+these files are installed by default when fun plug runs the first time
+Create these folders:
+//Volume_1/www//
+//Volume_1/www/logs//
+//Volume_1/www/pages//
+Run Putty. You will get a black box with an octet: # and a green cursor. you will enter the commands below at the green cursor. the octet is shown as a
+reference point.
+this command will copy the lighttpd configuration file /examples to ffp/etc:
+**# cd /ffp/etc**
+**# cp examples/lighttpd.conf /ffp/etc/lighttpd.conf**
+this makes the lighttpd shell file in the /ffp/start directory executeable:
+**# cd /ffp/start**
+**# chmod +x lighttpd.sh**
+it will not start if lighttpd.conf is not in /ffp/etc
+to manually start lighttpd:
+**# sh /ffp/start/lighttpd.sh start**
+If it's running you will see port 8080 open on your DNS-323 when you Start Scanning in Netscan
+=====  Lighttpd with SQLite  =====
+Update extensions path in php.ini to point to '/ffp/lib/php/extensions/no-debug-non-zts-20
+/'
+==== Installation of SQLite ====
+  * wget http://www.inreto.de/dns323/fun-plug/0.5/packages/sqlite-3.5.6-3.tgz
+  * funpkg -i sqlite-3.5.6-3.tgz
+==== Configuration of PHP ====
+  * Add some lines to /ffp/etc/php.ini if you need support for SQL in PHP (Create file if needed):
+''[PHP]\\
+extension=pdo.so\\
+extension=pdo_sqlite.so\\
+extension=sqlite.so''
+  * Restart ligthttpd (As root):
+''/ffp/start/lighttpd.sh restart''

Differences

Views

Navigation

Personal Tools

Search

Toolbox