This is an old revision of the document!
HOWTO Build lighttpd
First, set up your crosscompile toolchain. Download build_lighttpd_pa1.tgz. Extract, edit the file to correct the bug in tar xvfz zips/.tar.gz –> tar xvfz zips/$APP-$APP_VER.tar.gz and then execute.
Transfer the result, dns323_lighttpd-1.4.13.tar.gz, to /mnt/HD_a2 and extract it lnx_bin/busybox3 tar xvz -f dns323_lighttpd-1.4.13.tar.gz
Create a file, index.html, located in /mnt/HD_a2/www:
<html> <body> Hello World from DNS-323 </body> </html>
Create a file, lighttpd.conf, located in /mnt/HD_a2/lnx_bin:
server.document-root = "/mnt/HD_a2/www/" server.port = 3000 mimetype.assign = ( ".html" => "text/html", ".txt" => "text/plain", ".jpg" => "image/jpeg", ".png" => "image/png" )
Now, let lighttpd analyze the file using ./lighttpd -t -f lighttpd.conf and if that worked out, start the server using ./lighttpd -D -f lighttpd.conf
Access your server on port 3000, e.g. http://192.168.0.200:3000/index.html
Notes on the application
The default path for the mod_-files are compiled into the application to be /mnt/HD_a2/lnx_bin/lib using the -DLIBRARY_DIR directive. To have the modules in another directory, change the build script or start the server with argumet -m PATH
Note on lighttpd version
Beginning with 1.5.0, lighttpd depends on glib2.
Notes on using port 80 for lighttpd
For fun-plug v0.5 click here and look for Port 80 for fun-plug versions 0.3 & 0.4 see below…
Since the DNS-323 Admin service (webs) uses port 80 in order to use port 80 for lighttpd you'll need to do the following:
- Modify ligttpd.conf file to include “server.port = 80”
- Stop the lighttpd service
- Stop the 'webs' service
- Start the lighttpd service
or use the two scripts below and make sure you put them in ./fun_plug.d/start directory with the correct CHMOD settings so they run automatically.
The admin service on your DNS-323 will now be available on port 81. To access: http://192.168.0.200:81
Here's the 'lighttpd.sh' script:
#!/bin/sh
#
# This script was modified by Paul on 2/2/08 as a work around
# in getting the admin website off of port 80 and on to port 81
# It is used in conjuction with admwebs.sh (created) which is
# called from this script. lighttpd.sh stops (via admwebs.sh) the
# web admin service and then starts lighttpd on port 80. The web admin
# now (automatically) starts on port 81 after a few seconds. The admin
# service tests for use on port 80. If it's in use then bumps to the
# next available port (in this case it's bumped to port 81).
#
# NOTE:
# ./fun_plug.d/etc/lighttpd.conf needs to be configured to use
# port 80
#
# USE "netstat -tln" to verify that both port 80 & 81 are in use.
#
lighttpd_start() {
# make sure, upload directory exists
# path must match server.upload-dirs in lighttpd.conf file!
mkdir -p ${VOL1}/tmp
chmod 01777 ${VOL1}/tmp
if [ -x "${SBINDIR}/lighttpd" ]; then
echo "Stopping WEB admin"
/mnt/HD_a2/fun_plug.d/start/admwebs.sh stop
echo "Starting lighttpd... "
${SBINDIR}/lighttpd -f ${ETCDIR}/lighttpd.conf 1>/dev/null 2>/dev/null </dev/null
echo "Starting WEB admin on port 81"
/mnt/HD_a2/fun_plug.d/start/admwebs.sh start
echo "done!"
else
echo "ERROR: lighttpd not found or not executable"
fi
}
lighttpd_stop() {
killall lighttpd
}
lighttpd_status() {
if [ -n "$(pidof lighttpd)" ]; then
echo "running"
else
echo "stopped"
fi
}
case "$1" in
stop)
lighttpd_stop
;;
restart)
lighttpd_stop
sleep 1
lighttpd_start
;;
status)
lighttpd_status
;;
start|'')
lighttpd_start
;;
*)
echo "Usage: $0 start|stop|restart|status"
;;
esac
Here's the 'admwebs.sh' script:
#!/bin/sh
#
# This script was created by Paul on 2/2/08 as a work around
# in getting the admin website off of port 80 and on to port 81
# It is used in conjuction with lighttpd.sh (also modified) which
# calls this script. When used from lighttpd.sh it stops the
# web admin service then starts lighttpd on port 80. The web admin
# service notices that something is on port 80 and then starts on
# port 81.
#
# NOTE:
# ./fun_plug.d/etc/lighttpd.conf needs to be configured to use
# port 80
#
# NOTE2: (2/14/08)
# Updated this script to remove "Starting" webs. Apparently
# if you start webs you will not be able to add users
# webs is set to automatically restart if the /web/webs service
# is stopped.
#
admwebs_start() {
if [ -x "/web/webs" ]; then
# echo "Starting webs... "
# /web/webs & > /dev/null
echo "/webs/webs service will start automatically in 45 sec"
else
echo "ERROR: /web/webs not found or not executable"
fi
}
admwebs_stop() {
killall webs
}
admwebs_status() {
if [ -n "$(pidof webs)" ]; then
echo "running"
else
echo "stopped"
fi
}
case "$1" in
stop)
admwebs_stop
;;
restart)
admwebs_stop
sleep 1
admwebs_start
;;
status)
admwebs_status
;;
start|'')
admwebs_start
;;
*)
echo "Usage: $0 start|stop|restart|status"
;;
esac
Easy Ways
- A pre-compiled variant can be found here
- lighttpd is also included in fonz's fun_plug pack, a comprehensive fun_plug package that's easy to implement and great for first time users. php is a separate package that can be added easily. Instructions are provided.
Lighttpd for Windows Users
if you don't speak linux gibberish:
Before you begin:
Install Putty on your PC: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Install Netscan on your PC: http://www.softperfect.com/products/networkscanner/
Run Netscan. click the Options tab, then the Additional subtab. Click all the buttons. in the box on the bottom type 22, 23, 80, 443, 8080. Click OK.
Click the IP box, then click the range of your network in the box that pops up.
these files must be in these locations in Volume_1 of the DNS-323:
lighttpd.sh in /ffp/start
lighttpd.conf in ffp/etc/examples
these files are installed by default when fun plug runs the first time
Create these folders:
Volume_1/www
Volume_1/www/logs
Volume_1/www/pages
Run Putty. You will get a black box with an octet: # and a green cursor. you will enter the commands below at the green cursor. the octet is shown as a
reference point.
this command will copy the lighttpd configuration file /examples to ffp/etc:
# cd /ffp/etc
# cp examples/lighttpd.conf /ffp/etc/lighttpd.conf
this makes the lighttpd shell file in the /ffp/start directory executeable:
# cd /ffp/start
# chmod +x lighttpd.sh
it will not start if lighttpd.conf is not in /ffp/etc
to manually start lighttpd:
# sh /ffp/start/lighttpd.sh start
If it's running you will see port 8080 open on your DNS-323 when you Start Scanning in Netscan
