Differences

This shows you the differences between the selected revision and the current version of the page.

--- howto:nut_ups 2009/03/22 16:12
+++ howto:nut_ups 2023/09/07 21:19 current
@@ Line 2: / Line 2: @@
 Instruction for installation of Network UPS Tools (NUT) on fun_plug v 0.5. These instructions are based on information found at the Network UPS Tool website ([[http://networkupstools.org/doc/2.2.0/INSTALL.html]]).
-===== Getting Started =====
+====== Summary ======
+The primary goal of the Network UPS Tools (NUT) project is to provide reliable monitoring of UPS and PDU hardware and ensure safe shutdowns of the systems which are connected.
+We attempt to monitor every kind of UPS and PDU, given sufficient interest.  Summary from [[http://networkupstools.org|NUT project page]].
+===== Getting Started =====
-==== What's Needed ====
-A DNS323 with Fun_Plug 0.5 installed.
-A functional telnet connection.
+==== What's Needed ====
 Successful installation of NUT requires three packages from fonz's website ([[http://www.inreto.de/dns323/fun-plug/0.5/packages/]]). They are;
   * libusb-0.1.12-1.tgz;
   * neon-0.25.5-1.tgz and;
   * nut-2.2.2-3.tgz
 === Assumptions ===
-Firmware 1.05 or 1.06 installed on DNS323
+DNS323 is operating with Firmware version 1.05 or 1.06 (Installation has not been tested with other firmware versions).
+Fun_Plug 0.5 installed and operable.
+A functional telnet connection.
@@ Line 83: / Line 90: @@
 	cp /ffp/etc/examples/nut/ups.conf.sample /ffp/etc/ups.conf
 ==== Add Driver Configuration Detail ====
-Prior to modifying the ups.conf file you'll need to determine which driver is used with your specific UPS. A UPS hardware compatibility list is located on the [[http://www.networkupstools.org/compat/stable.html|Network UPS Tools]] website. Review this list to determine which driver is required for your specific application. Please note these instructions pertain specifically to USB connected UPS.
+Prior to modifying the ups.conf file you'll need to determine which driver is used with your specific UPS. A UPS hardware compatibility list is located on the [[https://networkupstools.org/stable-hcl.html]] website. Review this list to determine which driver is required for your specific application. Please note these instructions pertain specifically to USB connected UPS.
 Use your favourite editor (I use Notepad++) to open the ups.conf file, enter and subsequently save your specific settings.
@@ Line 156: / Line 164: @@
 The Network Server can be stopped by issuing an ''upsd -c stop'' command.
@@ Line 177: / Line 186: @@
 	battery.date: 2001/09/25
 	battery.mfr.date: 2008/06/05
-	battery.runtime: 2235
+	battery.runtime: 2535
 	battery.runtime.low: 120
 	battery.temperature: 29.2
@@ Line 183: / Line 192: @@
 	battery.voltage: 27.8
 	battery.voltage.nominal: 24.0
+	device.mfr: American Power Conversion
+	device.model: Back-UPS RS 900
+	device.serial: 5B0743U08220
+	device.type: ups
 	driver.name: usbhid-ups
 	driver.parameter.pollfreq: 30
@@ Line 190: / Line 203: @@
 	driver.version.data: APC HID 0.93
 	driver.version.internal: 0.34
-	input.voltage: 121.0
+	input.voltage: 122.0
 	input.voltage.nominal: 120
 	output.voltage: 120.0
@@ Line 198: / Line 211: @@
 	ups.firmware: 9.o2 .D
 	ups.firmware.aux: o2
-	ups.load: 22.0
+	ups.load: 18.0
 	ups.mfr: American Power Conversion
 	ups.mfr.date: 2007/10/24
@@ Line 207: / Line 220: @@
 	ups.test.result: No test initiated
 	ups.timer.reboot: 0
-	vups.timer.shutdown: -1
+	ups.timer.shutdown: -1
 	ups.vendorid: 051d
@@ Line 254: / Line 267: @@
 	chown root:nut /ffp/var/state/ups
 	chmod 0770 /ffp/var/state/ups
@@ Line 260: / Line 274: @@
 ====== Automating the Startup Process ======
 You can Telnet to the DNS323 each time you want to start NUT or use a startup script. The following can be added to a nut.sh script file and stored in the /ffp/start directory by copying the content of the code box into your favourite editor then saving the resultant file as /ffp/start/nut.sh.
+Use this script for DNS323 firmware versions prior to 1.07.
 	#!/ffp/bin/sh
@@ Line 273: / Line 289: @@
 	nut_start()
 	{
+		# Start NUT driver for UPS hardware.
+		/ffp/bin/upsdrvctl start
+		# Start NUT Network Server
+		/ffp/sbin/upsd
+		# Start NUT monitor agent
+		/ffp/sbin/upsmon -u monuser
+	}
+	nut_stop()
+	{
+		# Stop NUT monitor agent
+		/ffp/sbin/upsmon -c stop
+		# Stop NUT Network Server
+		/ffp/sbin/upsd -c stop
+		# Stop NUT driver for UPS hardware.
+		/ffp/bin/upsdrvctl stop
+	}
+	run_rc_command "$1"
+Use this script for DNS323 firmware version 1.07.
+	#!/ffp/bin/sh
+	# PROVIDE: nut
+	. /ffp/etc/ffp.subr
+	name="nut"
+	start_cmd="nut_start"
+	stop_cmd="nut_stop"
+	nut_start()
+	{
+	#####################
+	# We're using NUT UPS from ffp; #
+	#####################
+	############################################
+	# Stop built in NUT UPS deamons in preparation for starting ffp NUT UPS #
+	############################################
+		if ps | grep /usr/local/ups/bin/usbhid-ups | grep -v grep
+		then
+			echo "* Stopping Default UPS Services"
+			# Stop NUT Network Server
+			/sys/crfs/sbin/upsd -c stop
+			# Stop NUT driver for UPS hardware.
+			/sys/crfs/sbin/upsdrvctl stop
+		fi
+	sleep 2
+	##############
+	# Start ffp NUT UPS #
+	##############
 		# Start NUT driver for UPS hardware.
 		/ffp/bin/upsdrvctl start

Differences

Views

Navigation

Personal Tools

Search

Toolbox