Differences

This shows you the differences between the selected revision and the current version of the page.

howto:nut_ups 2009/04/08 05:42 howto:nut_ups 2023/09/07 21:19 current
Line 90: Line 90:
cp /ffp/etc/examples/nut/ups.conf.sample /ffp/etc/ups.conf cp /ffp/etc/examples/nut/ups.conf.sample /ffp/etc/ups.conf
 +
==== Add Driver Configuration Detail ==== ==== Add Driver Configuration Detail ====
-Prior to modifying the ups.conf file you'll need to determine which driver is used with your specific UPS. A UPS hardware compatibility list is located on the [[http://www.networkupstools.org/compat/stable.html|Network UPS Tools]] website. Review this list to determine which driver is required for your specific application. Please note these instructions pertain specifically to USB connected UPS. +Prior to modifying the ups.conf file you'll need to determine which driver is used with your specific UPS. A UPS hardware compatibility list is located on the [[https://networkupstools.org/stable-hcl.html]] website. Review this list to determine which driver is required for your specific application. Please note these instructions pertain specifically to USB connected UPS.
Use your favourite editor (I use Notepad++) to open the ups.conf file, enter and subsequently save your specific settings. Use your favourite editor (I use Notepad++) to open the ups.conf file, enter and subsequently save your specific settings.
Line 163: Line 164:
The Network Server can be stopped by issuing an ''upsd -c stop'' command. The Network Server can be stopped by issuing an ''upsd -c stop'' command.
 +
Line 184: Line 186:
battery.date: 2001/09/25 battery.date: 2001/09/25
battery.mfr.date: 2008/06/05 battery.mfr.date: 2008/06/05
- battery.runtime: 2235+ battery.runtime: 2535
battery.runtime.low: 120 battery.runtime.low: 120
battery.temperature: 29.2 battery.temperature: 29.2
Line 190: Line 192:
battery.voltage: 27.8 battery.voltage: 27.8
battery.voltage.nominal: 24.0 battery.voltage.nominal: 24.0
 + device.mfr: American Power Conversion
 + device.model: Back-UPS RS 900
 + device.serial: 5B0743U08220
 + device.type: ups
driver.name: usbhid-ups driver.name: usbhid-ups
driver.parameter.pollfreq: 30 driver.parameter.pollfreq: 30
Line 197: Line 203:
driver.version.data: APC HID 0.93 driver.version.data: APC HID 0.93
driver.version.internal: 0.34 driver.version.internal: 0.34
- input.voltage: 121.0+ input.voltage: 122.0
input.voltage.nominal: 120 input.voltage.nominal: 120
output.voltage: 120.0 output.voltage: 120.0
Line 205: Line 211:
ups.firmware: 9.o2 .D ups.firmware: 9.o2 .D
ups.firmware.aux: o2 ups.firmware.aux: o2
- ups.load: 22.0+ ups.load: 18.0
ups.mfr: American Power Conversion ups.mfr: American Power Conversion
ups.mfr.date: 2007/10/24 ups.mfr.date: 2007/10/24
Line 214: Line 220:
ups.test.result: No test initiated ups.test.result: No test initiated
ups.timer.reboot: 0 ups.timer.reboot: 0
- vups.timer.shutdown: -1+ ups.timer.shutdown: -1
ups.vendorid: 051d ups.vendorid: 051d
Line 261: Line 267:
chown root:nut /ffp/var/state/ups chown root:nut /ffp/var/state/ups
chmod 0770 /ffp/var/state/ups chmod 0770 /ffp/var/state/ups
 +
Line 267: Line 274:
====== Automating the Startup Process ====== ====== Automating the Startup Process ======
You can Telnet to the DNS323 each time you want to start NUT or use a startup script. The following can be added to a nut.sh script file and stored in the /ffp/start directory by copying the content of the code box into your favourite editor then saving the resultant file as /ffp/start/nut.sh. You can Telnet to the DNS323 each time you want to start NUT or use a startup script. The following can be added to a nut.sh script file and stored in the /ffp/start directory by copying the content of the code box into your favourite editor then saving the resultant file as /ffp/start/nut.sh.
 +
 +Use this script for DNS323 firmware versions prior to 1.07.
#!/ffp/bin/sh #!/ffp/bin/sh
Line 280: Line 289:
nut_start() nut_start()
{ {
 + # Start NUT driver for UPS hardware.
 + /ffp/bin/upsdrvctl start
 +
 + # Start NUT Network Server
 + /ffp/sbin/upsd
 +
 + # Start NUT monitor agent
 + /ffp/sbin/upsmon -u monuser
 + }
 +
 + nut_stop()
 + {
 + # Stop NUT monitor agent
 + /ffp/sbin/upsmon -c stop
 +
 + # Stop NUT Network Server
 + /ffp/sbin/upsd -c stop
 +
 + # Stop NUT driver for UPS hardware.
 + /ffp/bin/upsdrvctl stop
 + }
 +
 + run_rc_command "$1"
 +
 +
 +Use this script for DNS323 firmware version 1.07.
 +
 + #!/ffp/bin/sh
 +
 + # PROVIDE: nut
 +
 + . /ffp/etc/ffp.subr
 +
 + name="nut"
 + start_cmd="nut_start"
 + stop_cmd="nut_stop"
 +
 + nut_start()
 + {
 + #####################
 + # We're using NUT UPS from ffp; #
 + #####################
 +
 + ############################################
 + # Stop built in NUT UPS deamons in preparation for starting ffp NUT UPS #
 + ############################################
 + if ps | grep /usr/local/ups/bin/usbhid-ups | grep -v grep
 + then
 + echo "* Stopping Default UPS Services"
 + # Stop NUT Network Server
 + /sys/crfs/sbin/upsd -c stop
 +
 + # Stop NUT driver for UPS hardware.
 + /sys/crfs/sbin/upsdrvctl stop
 + fi
 +
 + sleep 2
 +
 + ##############
 + # Start ffp NUT UPS #
 + ##############
# Start NUT driver for UPS hardware. # Start NUT driver for UPS hardware.
/ffp/bin/upsdrvctl start /ffp/bin/upsdrvctl start

Navigation
[Edit]
Personal Tools