OpenVPN

openvpn config information is here http://openvpn.net/index.php/open-source/documentation/howto.html read it!

also look at the forum post http://forum.dsmg600.info/t1495-Compiled-Working%3A-OpenVPN.html

here is a quick guide for funpkg (YMMV)

get funpkg openvpn package from http://ffp.wolf-u.li/additional/net-misc/

wget http://ffp.wolf-u.li/additional/net-misc/openvpn-2.2.1-2.tgz

install package on your NAS

funpkg -i openvpn-2.2.1-2.tgz

create certificates and keys on a fast computer with openvpn installed, I did this on my ubuntu 11.04 box

cp -r /usr/share/doc/openvpn/examples/easy-rsa/2.0 ~/openvpn_certificates
cd ~/openvpn_certificates

edit the ./vars file to your liking and load the variables

. ./vars

clean data

./clean-all

build certificate authority

./build-ca

now build the key for the server (your NAS) (and sign certificate)

./build-key-server server

and for a client (and sign certificate)

./build-key client

and for another client

./build-key phone

build diffie-hellman parameters

./build-dh

now you have all the files you need in ~/openvpn_certificates/keys

copy the following files to the NAS and put for example in /ffp/etc/openvpn

ca.crt ca.key dh1024.pem server.key

now create a openvpn config file, for example /ffp/etc/openvpn.conf

port 1194
proto udp
dev tun

ca /ffp/etc/openvpn/ca.crt
cert /ffp/etc/openvpn/server.crt
key /ffp/etc/openvpn/server.key  # This file should be kept secret
dh /ffp/etc/openvpn/dh1024.pem

# openvpn server will be on 10.8.0.1
server 10.8.0.0 255.255.255.0

ifconfig-pool-persist ipp.txt
status openvpn-status.log

keepalive 10 120
comp-lzo
persist-key
persist-tun

verb 3

for more info on configuring openvpn look at http://openvpn.net/index.php/open-source/documentation/howto.html#server

for the openvpn server to work, the tun.ko kernel module must be loaded, unfortunately there is a small error in the funpkg package so

mv /ffp/lib/modules/kernel/2.6.12.6-arm1/tun.ko /ffp/lib/modules/kernel/2.6.12.6-arm1/drivers/net/tun.ko

now try the openvpn server

sh /ffp/start/openvpn.sh debug

if it works

ctrl+c
sh /ffp/start/openvpn.sh start

if you want to start openvpn at funpkg startup

 chmod 755 /ffp/start/openvpn.sh

configuring the client will not be described here in detail but you need the following files from ~/openvpn_certificates/keys on your openvpn client

ca.crt client.crt client.key

my client configuration looks like this

client
dev tun
proto udp
remote [server ip or hostname] 1194
resolv-retry infinite
nobind
user nobody
group nogroup
persist-key
persist-tun
ca ~/openvpn/ca.crt
cert ~/openvpn/client.crt
key ~/openvpn/client.key
comp-lzo

again, for detailed information look at http://openvpn.net/index.php/open-source/documentation/howto.html#client

if you want you reach your NAS from outside your network, do not forget to forward port 1194 in your router (or whichever port you have chosen)

if everything goes allright when connected, your NAS will be reachable at 10.8.0.1 test it for example by

ping 10.8.0.1

note: if you are already connected to a 10.8.0.* network, routing will be messed up, it could be convenient to chose a bit more obscure address for your vpn, for example 10.161.80.*