Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I get warnings like this in dmesg on boot:
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
This thread http://dns323.kood.org/forum/t133-Raid- … dmesg.html says that you have to umount /dev/md0 before running e2fsck on it.
But I cannot umount because it is in use!
A ps gives that the telnet-deamon is run from the mounted disc, and without telnet I cannot login to the unit...
Has anyone figured out how to run e2fsck with this setup?
Offline
You can remount the disk readonly. Then you can do an fsck. However I am not sure that the error message comes from the fs on the md0. It might be the ramdisk it boots from...
Offline
You'll probably also find that the message remains - even after running e2fsck - at least I did.
Offline
e2fsck always finds some errors on my RAID1 after restart, usually some minor ones.
It looks as if the RAID shutdown during power off procedure fails- and it makes me feel uneasy about the security of the data stored there...
Offline