DSM-G600, DNS-3xx and NSA-220 Hack Forum

timofej wrote:

So, I want to do everything in one sweep.

Just at word of caution, it might be preferable to do your changes one at a time,
with a small period of time between each change to evaluate whether your DNS-323
is still functioning the way you want.

Trying to change many things all at once and obscure the root cause of a problem,
if you start to experience undesirable behavior of you DNS-323 during the modifications.

timofej wrote:

However, I think that to move the fun_plug on the USB-stick is the first step to do

Won't work with 0.3, needs 0.5.

timofej wrote:

Thank you for the notation, I didn't know that. I believe I've seen people installing the fun_plug on USB-stick long before 0.5 release. And before v0.4 for that matter. But may be I'm wrong and just imagine things.

You're not. People did put it on USB sticks. But it had problems that are solved in 0.5.

have look here, for me it worked very well:

http://bfg100k.blogspot.com/search/label/NAS%20Project

Last edited by knireis (2008-08-13 15:26:57)

Hi!

I have some problems following this instruction. I thought that the whole ffp is loaded from the usb stick. So I deleted the folder on the hard disk. Afterwards ffp isn't executed anylonger.... How do I manage it that the ffp is completly loaded from the usb stick? Do I need to change the FFP_PATH inside the script?

BR,

JackShepard

Last edited by JackShepard (2008-08-16 17:49:15)

Hmm. I'm in trouble trying following the instructions.

Here is what I did:

- installed fun_plug 0.5 (on fw 1.05).
- attached the USB stick (2 GB, FAT16)
- copied usb-storage.ko to /ffp/lib/modules/[kernel_version]/ as described in the article
- ran ". ./usbdisk.sh" and got:

Usage: sh start|stop|restart|status
Connection closed by foreign host.

No good. Tried the approach to mount USB drive as described in wiki:

/mnt/HD_a2/lnx_bin # insmod usb-storage.ko
/mnt/HD_a2/lnx_bin # dmesg

and got a loooong message that ended with:

Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
  Vendor: Kingston  Model: DataTraveler 2.0  Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sdc: 3930112 512-byte hdwr sectors (2012 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 3930112 512-byte hdwr sectors (2012 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
 sdc:<6>SCSI error : <4 0 0 0> return code = 0x70000
end_request: I/O error, dev sdc, sector 0
Buffer I/O error on device sdc, logical block 0
SCSI error : <4 0 0 0> return code = 0x70000
end_request: I/O error, dev sdc, sector 0
Buffer I/O error on device sdc, logical block 0
 unable to read partition table
Attached scsi removable disk sdc at scsi4, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi4, channel 0, id 0, lun 0,  type 0
usb-storage: device scan complete

The USB stick seems have not been mounted. "SCSI error", whatever it means. What is the problem? Can somebody help me out please?

My questions are:

1. Why didn't it work in the first place (when I ran ". ./usbdisk.sh")?
2. Why does the USB stick have these SCSI errors? What should I do to move on?
3. The unpacked ffp directory seems to be 6.12(!) GB (see the attached screen shot). I downloaded just a small 9.9 MB package fun_plug.tz and got 6.12 GB unpacked data. Is it possible? If this is correct it will never get enough space on my stick. Or have I misunderstood all of it?

*edit* used Preview and the attachment disappeared.

Last edited by timofej (2008-08-17 01:08:17)

---

Attachments:
Bild 1.png, Size: 47,736 bytes, Downloads: 131