DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2010-08-11 12:53:42
- Stargrove1
- Member
- Registered: 2010-08-11
- Posts: 16
Turn off leds
Is it possible to turn the leds off by software? I am also using a Fritzbox 7270 and here I could turn all leds off with the custom Linux firmware. Both devices stand in the living room and my girl is annoyed by the lights (and the fan unfortunatelly).
I only found a post how to make the leds blink.
Thanks
Offline
#3 2010-08-11 14:14:19
- Stargrove1
- Member
- Registered: 2010-08-11
- Posts: 16
Re: Turn off leds
Do you turn your lights out at home in this way ;o)
The leds are outputs of a µC, if possible I would prefer to to turn them simply off instead off covering them.
Offline
#4 2010-08-12 02:58:04
- vishnumrao
- Member
- Registered: 2010-08-09
- Posts: 16
Re: Turn off leds
I don't think there is a software method to trun off the HardDrive activity LED and the network activity LED. But you can turn OFF the Power LED from the config pages.
I am using duct tape currently to be able to sleep at night!
Offline
#5 2010-11-21 16:14:40
- meyerovb
- Member
- Registered: 2009-11-25
- Posts: 6
Re: Turn off leds
Where on the config pages for the DNS-321 can I turn off the power led?
Offline
#6 2010-11-22 00:17:33
- FunFiler
- Member
- Registered: 2010-05-23
- Posts: 577
Re: Turn off leds
meyerovb wrote:
Where on the config pages for the DNS-321 can I turn off the power led?
Tools -> System -> Power LED Control
[not sure about the 321, this is for the 323]
Last edited by FunFiler (2010-11-22 00:18:14)
3 * (DNS-323 with 2 * 2TB) = 12TB Running FW v1.08 & FFP v0.5
Useful Links: Transmission, Transmission Remote, Automatic
Offline
#7 2010-11-22 00:32:49
- meyerovb
- Member
- Registered: 2009-11-25
- Posts: 6
Re: Turn off leds
FunFiler wrote:
meyerovb wrote:
Where on the config pages for the DNS-321 can I turn off the power led?
Tools -> System -> Power LED Control
[not sure about the 321, this is for the 323]
No joy on the 321, that setting doesn't exist on that page.
Offline
#8 2010-11-28 19:02:11
- djtaz
- Member
- Registered: 2010-04-03
- Posts: 33
Re: Turn off leds
Try getting the latest firmware - you are using version 1.03 , i think the LED option only came out in version 1.08
Offline
#9 2010-11-28 20:03:38
- meyerovb
- Member
- Registered: 2009-11-25
- Posts: 6
Re: Turn off leds
djtaz wrote:
Try getting the latest firmware - you are using version 1.03 , i think the LED option only came out in version 1.08
I have the 321, and the latest firmware available for it from the dlink site is 1.03. Where can I get 1.08 for it, or is that version only available for the 323?
Offline
#10 2010-11-29 01:32:35
- FunFiler
- Member
- Registered: 2010-05-23
- Posts: 577
Re: Turn off leds
The DNS321 and the DNS323 use differenct firmware, thus are at different release levels with different options. It does seem a bit strange given the similarity of the hardware although I haven't fully explored what the hardware similarities/differences are.
3 * (DNS-323 with 2 * 2TB) = 12TB Running FW v1.08 & FFP v0.5
Useful Links: Transmission, Transmission Remote, Automatic
Offline