DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2010-10-24 05:29:02

unmesh
Member
Registered: 2008-03-26
Posts: 55

One hard drive no longer visible over SMB

One of the two hard drives in my DNS-321 is no longer visible over SMB from my PCs. It shows up in Windows explorer along with its twin using UNC access e.g. \\DNS321 but I cannot look at the contents and get a "access permissions" error message.

As it happens, it was in the right hand slot hence Volume_1 but, since I had started the other drive on its own in the right hand slot (so that it would be subsequently bootable), I swapped drives. Now Volume_2 is not accessible over SMB.

I also have a DNS-323 and I put the problem drive into it's left hand slot; again, not visible over SMB. It is also not accessible over rsync between the two boxes. I have not tried FTP.

Interestingly, the volume is always accessible locally if I telnet into the NAS.

It looks like it might be a permissions problem of some sort though I did not make any changes that I am aware of. Any ideas as to how to debug this will be greatly appreciated.

Thanks.

Last edited by unmesh (2010-10-24 05:33:45)


DNS-323 FW1.10B7 WD20EARS_2TB Samsung_HD753LG_750G FFP_0.5
DNS-321 FW1.03  FFP_0.7 (Spare enclosure)
DNS-320 FW2.02 Hitachi_HDS5C3020ALA632_2TB Hitachi_HDS721010KLA330_1TB FFP_0.5

Offline

 

#2 2010-10-25 22:15:29

index monkey
Member
From: UK
Registered: 2007-06-14
Posts: 112

Re: One hard drive no longer visible over SMB

Is the sharing set up in the firmware?

in Advanced , Network Access, SBM List.

I think you will need to redo the share for swapping disk from left to right.


DNS-323, HW B1, 2 x 2TB WD green, fw 1.08, fun_plug 0.5, transmission, automatic, nzbget newsreader & rsync time machine backup.

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB