DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2008-02-18 08:02:14

markchicobaby
Member
Registered: 2008-01-13
Posts: 22

Is 1.04 firmware OK to use in Australian DNS323?

Hi

The 1.04 firmware is not available on the Australian Dlink support site www.dlink.com.au.  Most recent they list is 1.03.

I was going to use the 1.04 version from the US site www.dlink.com but the download page has warnings to say it is for US sold models only and using it outside of the US will void my warranty etc.

Is the 1.04 firmware from the US site able to be used in my Australian purchased DNS323 or will it brick the unit?

Thank you
M

Last edited by markchicobaby (2008-02-18 08:02:41)

Offline

 

#2 2008-02-18 10:43:51

jayas
Member
Registered: 2008-01-24
Posts: 151

Re: Is 1.04 firmware OK to use in Australian DNS323?

markchicobaby wrote:

Is the 1.04 firmware from the US site able to be used in my Australian purchased DNS323 or will it brick the unit?

I am using 1.04 on a couple of DNS-323's purchased in Australia and it has not bricked them.

Jaya


H/W=B1 F/W=1.04; RAID1: SAMSUNG HD501LJ T166 (500GB, SATA 3.0Gb/s 16MB)

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB