Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hallo
Cnfiguration: ch3snas
2 harddisks of 500 gig
Is it possible to make a configuration in the web interface like below:
a small volume_1 JBOD 0ff apr. 20 gig
a big volume_2 RAID1 off apr. 480 gig
When i do a raid configuration i always end up with a large volume_1 and a small volume_2
I want to have a small volume_1 JBOD for playing with fun_plug and a big Volume_2 RAID1 for storage
Any solutions?
Offline
Maybe it would be better if you moved the fun_plug off to a USB device and just had one large RAID1 as Volume_1. See the following help:
http://dns323.kood.org/howto:external_drive
http://backupnetclone.sourceforge.net/i … on01a.html
To clarify, the fun_plug file itself still must reside on the Volume_1 along with the USB driver file, but you can move all of the "real" functionality off of Volume_1 by loading a USB driver and immediately going to the USB device to load any further add-ons.
Last edited by blbrown (2008-02-18 22:11:00)
Offline