DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2008-03-04 19:08:00

snp99
Member
Registered: 2008-03-04
Posts: 5

Need help asap.

My dns wouldn't see my volume1 (two drives as raid 1) anymore.  It kept wanting to format them after a power failure and reboot.  I pulled one of the drives and put it into a box running Ubuntu.  In Gparted the drive shows up as a linux-swap and the ext2 partition.  I tried mounting them but my linux is not that good and I get 'unknown filesystem type 'linux_raid_member' for the ext partition and 'looks like swapspace not mounted' for the linux-swap partition.  I was using 'mount /dev/sdb2 /media/drive' to mount them.  Any advice or help on mounting the drive would be appreciated.  I need to get to the data asap.

Offline

 

#2 2008-03-04 20:58:29

snp99
Member
Registered: 2008-03-04
Posts: 5

Re: Need help asap.

Anybody?  I'm desperate.  I loaded one of the drives into the Ubuntu box.  Using the gparted partition editor, I can see the drive and both partitions.  It won't let me mount them though.

Offline

 

#3 2008-03-04 21:13:10

oxygen
Member
Registered: 2008-03-01
Posts: 320
Website

Re: Need help asap.

the drive layout has an aditional layer, the raid system. try something like that:

mdadm --assemble /dev/md0 --run /dev/sdb2
mount -t ext2 /dev/md0 /mnt/drive

Last edited by oxygen (2008-03-04 21:20:58)

Offline

 

#4 2008-03-04 22:42:30

snp99
Member
Registered: 2008-03-04
Posts: 5

Re: Need help asap.

Tried that.  Now my data disappeared.  It shows the drive as only having 7gb used instead of 130 gb like it should.  I really need to mount this drive.  Any other solutions.  Thanks

Offline

 

#5 2008-03-04 22:51:39

mealto
Member
Registered: 2008-02-02
Posts: 95

Re: Need help asap.

How about installing http://www.fs-driver.org/ and using Windows to mount it if that is easier?

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB