DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2008-03-07 13:22:58

isa
New member
Registered: 2008-03-07
Posts: 2

Can't login into web inerface with "power off and swap hard drive loca

After changing fw to 1.04 got next message:

HARD DRIVE CONFIGURATION:
The hard drives have been installed incorrectly. Please power off and swap hard drive locations.

Swaping hard drives don't help.

Offline

 

#2 2008-03-07 15:10:01

jayas
Member
Registered: 2008-01-24
Posts: 151

Re: Can't login into web inerface with "power off and swap hard drive loca

Hello,

It does look like 1.04's 'real time monitoring of drives' is not working in your case.  I would recommend reverting back to 1.03 till we see post 1.04 updates addressing such issues.

Jaya


H/W=B1 F/W=1.04; RAID1: SAMSUNG HD501LJ T166 (500GB, SATA 3.0Gb/s 16MB)

Offline

 

#3 2008-03-07 16:03:22

isa
New member
Registered: 2008-03-07
Posts: 2

Re: Can't login into web inerface with "power off and swap hard drive loca

thanks for reply.

i revert back to 1.03 and it offer to reformat my drives. i don't want to do so.
is it any files/signatures/id on hdd which tell to DNS-323 where is drive from
left/right bay?

Offline

 

#4 2008-03-08 01:07:35

jayas
Member
Registered: 2008-01-24
Posts: 151

Re: Can't login into web inerface with "power off and swap hard drive loca

Hmm...  I was quite sure that if the drives were in the original state before you upgraded to 1.04, then the same drives would be accepted by DNS-323 on reverting to 1.03.   What configuration are you running?  Raid 1 or 0?

Perhaps someone who knows better can help provide instructions for configuring dives through telnet interface.

Jaya


H/W=B1 F/W=1.04; RAID1: SAMSUNG HD501LJ T166 (500GB, SATA 3.0Gb/s 16MB)

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB