DSM-G600, DNS-3xx and NSA-220 Hack Forum

I look into it tomorrow
Instead of copying, you need to symlink .so files into /lib. I did try to compile static binary but lots of nasty errors happened.

I did try to recompile but no help, I still get "Can't modify /usr/lib/libid3tag.so.0's text section. Use GCC option -fPIC for shared objects, please." error.

I have just been able to compile mt-daapd, thanks gentoo now running on my system. I've sent the compiled version to sala, so i hope it'll show up soon. It contains the admin pages and my config file.

My setup assumes mt-daapd is on HD_a2 in mt-daapd, the music is on HD_a2 in Music. Modify everything if needed.

Then put this in your fun_plug:

---
mkdir -p /mnt/HD_a2/mt-daapd/cache
ln -s /mnt/HD_a2/mt-daapd/libz.so.1 /lib/
ln -s /mnt/HD_a2/mt-daapd/libgdbm.so.3 /lib/
ln -s /mnt/HD_a2/mt-daapd/libid3tag.so.0 /lib/
/mnt/HD_a2/mt-daapd/mt-daapd -c /mnt/HD_a2/mt-daapd/mt-daapd.conf
---

The server starts and I can access the webpage. However, I was not able to see the music from iTunes (7.0.1 on OS X), which defeats the purpose. But its a step in the right direction!

Max

Unfortunately I still do not see it in my iTunes.

I've also tried compiling version svn-1376 (not submitted, I will if someone want to try it), same problem.

I've tried enabling multicast:
---
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
echo 1 > /proc/sys/net/ipv4/ip_forward
---

still no luck

Maybe someone else has an idea?

Max

Works pretty well for me so far.. Moving my music collection over, then I"ll see if my songs appear.. But loading and whatnot went pretty smoothly.  Thank you guys for putting the time and effort into getting this functional

Max, are you able to add the plugins for rsp? They are necessary for Roku Soundbriges and would be highly apreciated ;-)

http://www.rokulabs.com/forums/viewtopi … p;start=15 for instructions (but since I am a gentoo no-doer I´m lost)

Last edited by Grouper (2006-10-18 23:28:21)

I think this is the issue
----

Issues

It may be important to ensure the interface you want to advertise the daapd server on is in promiscuous mode. If your server either doesn't show up in iTunes, disappears after a period of time or take a long time to appear, try putting the interface in promiscuous mode. You can find out if its promiscuous using /sbin/ifconfig - see something like this:
Code: /sbin/ifconfig output

eth0      Link encap:Ethernet  HWaddr 01:23:45:67:89:ab 
          inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:23515 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9839 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0
          RX bytes:3778586 (3.6 Mb)  TX bytes:1569537 (1.4 Mb)

Turn on promiscuous mode with:

# ifconfig <interface> promisc

Make this permanent by adding the keyword "promisc" to the iface options:
Code: /etc/conf.d/net fragment

iface_eth0="192.168.1.100 broadcast 192.168.1.255 netmask 255.255.255.0 promisc"


---------------

Is this possible with the g600 or is it even an issue?  For that matter, does this device have a firewall of any type?

Last edited by idiotboy (2006-10-26 03:59:12)

Awesome!  That fixed my problem ( the start up on the wiki page)  works great for me!

Gents,

I've been fighting my DSM-G600 for the past couple of weeks, after I learned that it does much more that the original useless upnp (un)serving. Because I LIKED what I read, and I want to make my DSM run Firefly.

OK, I learned what fun_plug is. Learned how to make it work. Learned that I'd need busybox to be able to telnet...

But the wiki pages for how-to:firefly and how-to:extract do not teach anything (sorry folks, at least not to my lower linux level).

So could I use your help to have a new tread teaching how to use firefly on the G600 all the way to the end? After that, I promise I'll edit the wiki page and have it detailed step by step. Hopefully we can make the most recent Firefly Media Server nightlies work.

At the moment I'm stuck at:

- I can't extract anything inside the G600. Tried to send commands via telnet, it says bzcat not found and tar not found. I tried to download several different firefly packages (including the 0.2.4 of this site) and extract them on my windows computer, and then FTP all the files to the G600. BUT doing that, on all of the packages, there was no mt-daapd executable file.

I am probably blind to something very obvious, but I'm sure they are not in the forums or wikis... So I'll thank very much for the help, and then will try to compile all my doubts and solutions during the process on a single page. And hopefully lots of G600 and SoundBridge owners won't feel tempted to trash their network storage unit to buy a slug.

Cheers,

Bruno

Here's an odd thing... I can only get firefly to work when started manually from telnet. When executing the following lines one by one in a telnet session, firefly shows up in iTunes and I am able to play songs and all. But, when I put the same lines in fun_plug, I can see the shared location in iTunes for just a few seconds, after it disappears, never to return again...

I am able to access the webinterface, and it says everything is working.

mkdir -p /mnt/HD_a2/mt-daapd/cache
ln -s /mnt/HD_a2/mt-daapd/libz.so.1 /lib/
ln -s /mnt/HD_a2/mt-daapd/libgdbm.so.3 /lib/
ln -s /mnt/HD_a2/mt-daapd/libid3tag.so.0 /lib/
/mnt/HD_a2/mt-daapd/mt-daapd -c /mnt/HD_a2/mt-daapd/mt-daapd.conf

???

i've a problem.. my server appear in iTunes with all songs, but I can't play anything
Tested with iTunes 7.0.2 and iTunes 7.2 (same problem)

With Rhythmbox I see the server but not the songs...

?

Hi all.

I've a problem with mt-daapd :

The deamon starts correctly on the dsm but, when I try to reach my musique with ITunes, the mt-daapd share appears and ... desappeard as soon as i click on it (I can see the files for ... 1 or 2 secondes).

If I re-start Itunes, I still have the same (list appears and ... vasish after clicking and 1 or 2 seconds).

If i don't click to the share part of ITunes, mt-daaps stays (but It's though to listen my music then ...)

Because, dsm is behind a routeur, maybe I need to forward port but if I do so, how can I reach music from any comp in the local network ?

Do someone has a idea ?

Thank you.

Artefax