DSM-G600, DNS-3xx and NSA-220 Hack Forum

Hello,

Im having some trouble with this package:

/ # svn
R_ARM_PC24: Compile shared liraries with -fPIC

, using fonz fun_plug 0.3 and firmware 1.03. Anyone has any ideas?

Cheers,

-- Daniel

"R_ARM_PC24: Compile shared liraries with -fPIC"

One of the shared libraries used by svn either wasn't compiled with -fPIC set in the CFLAGS environment variable or configured with the appropriate PIC flag. I would assume it's working for Petasis as he's probably using different libraries that were compiled differently (i.e: copied the binary to the dns-323 and used existing libraries) - "ldd svn" will tell you what libraries are used by svn.

Hi, I'm a new user with svn (was on cvs till now ). with regards to the authentication, is it possible to switch to using the OS users rather than depending on the plain text passwd file? If so, how? Thanks

After running fonz convenient little shell script the culprit seems to be the libsvn_ra_dav library. Anyone else get this or have I screwed up during installation? I started cross compiling svn here locally, but it seems like it may take some time. Anyone beats me to it?

Cheers,

-- Daniel

The svn in the optware feed seems to work OK. (I just tested it for svn checkout ...)

See the instructions for installing binaries in this thread
http://dns323.kood.org/forum/t1797-%5Ba … k%27s.html

I think you might need to go over to page two to get the tips for configuring ipkg.conf, but when it's done you just need to type
ipkg install svn

Hi all,

question from a linux noob:

I get the following error when starting svnserve:

/mnt/HD_a2/fun_plug.d/start # svnserve start
svnserve: '/mnt/HD_a2/fun_plug.d/lib/libsvn_repos-1.so.0' is not an ELF file
svnserve: can't load library 'libsvn_repos-1.so.0'

Firmware: 1.03
funplug: 0.3


Any idea what might be the cause of this ?


Thanks,

Matthias.

Hi,

this is what I get:

/mnt/HD_a2/fun_plug.d/lib/libsvn_repos-1.so.0: ASCII text, with no line terminators


Maybe the issue is related to using total commander to unpack that svn archive.
I'll try again directly on my nas. Will keep you posted.


Thanks,

Matthias.

kh_naba, did you succeed in your SVN compilation? If yes, could you upload the libsvn_ra_dav somewhere?
Or are everybody using SVN from the optware feed now?
BTW, I checked the subversion-1.4.5 package and apparently it too was compiled without the fPIC flag :-(

What is the memory penalty for running funplug 0.5 compared to the previous ones? I mean with funplug 0.5 you have a new, separate set of shared libraries in RAM next to the DNS323 built-in ones. That must consume more RAM but how much?

This is the only reason I haven't switched to funplug 0.5 yet... I really don't think we're swamped in RAM on the DNS323, you know ;-)

subversion depends on libapr and libaprutils. You can get both pacakges at fonz' site: http://www.inreto.de/dns323/fun-plug/0.5/packages/

Download them to your DNS-323 and install them by issuing the command "funpkg -i apr.xxx.tgz apr-util.xxx.tgz"  (I don't have the correct file names right now, you'll figure it out

uyuni wrote:

What is the memory penalty for running funplug 0.5 compared to the previous ones? I mean with funplug 0.5 you have a new, separate set of shared libraries in RAM next to the DNS323 built-in ones. That must consume more RAM but how much?

This is the only reason I haven't switched to funplug 0.5 yet... I really don't think we're swamped in RAM on the DNS323, you know ;-)

That is a nice question, actually. I've been running 0.5 for a while now, and I haven't had any problems. Still, it'd be nice to know if all the additional libraries would cause RAM problems.
(btw, this is so not the correct topic for this question :p)