DSM-G600, DNS-3xx and NSA-220 Hack Forum

KyleK wrote:

What is Saw and where can it be found? Searching for "Saw" on google is impossible :p

hehehe
I think he meant Transmission...
The compile binary is 1.06 and they are up to 1.11

quekky wrote:

My transmission.sh only works with ffp 0.5, as it requires a function file in 0.5. It also auto setup the download dir on 1st run

You can modify KyleK or Shadowandy sh file and add "su nobody -c" in front of the command to run transmission-daemon. Remember to chmod the .transmission and download dir after that

I couldn't seem to get this working.

My start script has this line to start the Daemon

      nohup ${BINDIR}/transmission-daemon -f 1>/dev/null 2>/dev/null &

I tried the "su nobody -c" before and after the nohup but when I tried to start the daemon it didn't work.There were no errors but a ps -ef showed it was not running.

RAP

rap wrote:

quekky wrote:

My transmission.sh only works with ffp 0.5, as it requires a function file in 0.5. It also auto setup the download dir on 1st run

You can modify KyleK or Shadowandy sh file and add "su nobody -c" in front of the command to run transmission-daemon. Remember to chmod the .transmission and download dir after that

I couldn't seem to get this working.

My start script has this line to start the Daemon

      nohup ${BINDIR}/transmission-daemon -f 1>/dev/null 2>/dev/null &

I tried the "su nobody -c" before and after the nohup but when I tried to start the daemon it didn't work.There were no errors but a ps -ef showed it was not running.

RAP

I'm not too sure about ffp 0.4, I think you can try to put the full path of transmission-daemon

   su nobody -c "/mnt/HD_a2/fun_plug/bin/transmission-daemon -f 1>/dev/null 2>/dev/null &"

(include the quotes)

Last edited by quekky (2008-04-07 11:52:35)

rap wrote:

shouldn't that be

                          tar -xOvzf $ipkg_name ./data.tar.gz | tar -C / -xzvf -

as $ipk_name doesn't exist?

After running my corrected command when I try and run either /opt/bin/ipkg update or /opt/bin/ipkg list I get told the respone that "Successfully terminated." however there are no packages listed to install.

Thanks, I've corrected the ipkg_name typo.

The second problem is caused by not setting up any feed. The instruction for adding a feed is already on the wiki, repeated here.

To configure that feed as the default feed, just add in /opt/etc/ipkg.conf

src dns323 http://ipkg.nslu2-linux.org/feeds/optwa … /unstable/

jotka wrote:

Hello all
What are the advantages of transmission over the MlDonkey? Is it really worth to switch ? There are a lot of useful options in mldonkey and i cannot find them in transmission ? (file_completed_cmd for example).

In transmission you can add/remove torrents from webpage (from any computer with internetaxx) instead of uploading the torrent file via ftp in mldonkey, easy to change path where to download, it also seems to be accepted on more private trackers, it has lesser options but you can control upload/download speed and thats all i need.

There were some changes at the server side, which I didn't notice, sorry. The links should work again.

/dev/null should already be accessible, and it belongs to the user 'nobody' by default. I can't think of anything why that command would try to create /dev/null.

Make sure you don't have a typo in there. It has t be "1>/dev/null 2>/dev/null"  (no whitespaces before or after the >, there must be a slash before 'dev')

Btw, I had some problems with running Transmission as user 'nobody', because the .transmission folder and the download folder already existed.
In order to work properly, both directories have to be created by user 'nobody' as well.

quekky wrote:

For those running ffp 0.5-experimental, I've created a package based on shandowandy's binary

http://www.uploading.com/files/R4RMI1XE … 6.tgz.html

Installation:
- funpkg transmission-1.06.tgz
- /ffp/start/transmission.sh start

Notes:
- default TRANSMISSION_HOME=/mnt/HD_a2/downloads/.transmission
- default downloads to /mnt/HD_a2/downloads
- runs as "nobody" user so that you can delete the downloads from samba or ftp
- to manage use clutch (see KyleK's or shandowandy's instruction) or command line (need to "export TRANSMISSION_HOME=/mnt/HD_a2/downloads/.transmission")

Hi, quekky
Thanks for your compliling.
When i run transmission-daemon -d, i get error" [warn] epoll_create : Function not implemented", "Couldn't get information for file "//.transmission/stats.benc: No such file or directory

fonz wrote:

zionsg88 wrote:

su nobody -c "${BINDIR}/transmission-daemon -f 1>/dev/null 2>/dev/null &"

At least in some firmware versions, /dev/null is not world-writeable. All my funplugs fix this during boot. If you use sth else, try this:

Code:

chmod a+w /dev/null

Thanks.. I will try that first.. see if I can make it work

vedeja wrote:

Can anyone help how to make Transmission create downloaded files/folders with such permissions that it allows deletion from Windows where the 323 is mapped?

It's in this thread - see post 63

RAP

HI all,

I keep on getting a connection failed when I run Clutch, it says something about not being able to connect to the transmission server.  in the details of the error, I get "403 forbidden." I have already chmod -R 0777 /www/pages/clutch/remote/data. Please kindly advice. Thanks

export BINDIR='/mnt/HD_a2/fun_plug.d/bin'
export DATADIR='/mnt/HD_a2/fun_plug.d/share'
export ETCDIR='/mnt/HD_a2/fun_plug.d/etc'
export FUNPLUGDIR='/mnt/HD_a2/fun_plug.d'
export FUNPLUGTAR='/mnt/HD_a2/fun_plug.tar'
export HOME='/'
export LD_LIBRARY_PATH='/mnt/HD_a2/fun_plug.d/lib'
export LIBDIR='/mnt/HD_a2/fun_plug.d/lib'
export LOGDIR='/mnt/HD_a2/fun_plug.d/log'
export LOGFILE='/mnt/HD_a2/fun_plug.d/log/fun_plug.log'
export OLDPWD='/mnt/HD_a2/www/pages/clutch/remote/data'
export PATH='/mnt/HD_a2/fun_plug.d/sbin:/mnt/HD_a2/fun_plug.d/bin:/usr/bin:/bin:/usr/sbin:/sbin'
export PWD='/'
export SBINDIR='/mnt/HD_a2/fun_plug.d/sbin'
export SHELL='/bin/sh'
export TERM='vt102'
export USER='root'



1583 root     /sys/custom/upnp/upnp 0 D-Link Corporation http://www.dlink.com
1594 root     /web/webs
1606 root     fancontrol
1629 root     op_server 3 3 3
1635 root     -sh
1668 root     lpd Waiting
1709 root     crond
2234 root     /mnt/HD_a2/fun_plug.d/sbin/telnetd -l /mnt/HD_a2/fun_plug.d/bin/
2264 root     /mnt/HD_a2/fun_plug.d/sbin/lighttpd -f /mnt/HD_a2/fun_plug.d/etc
2272 root     /mnt/HD_a2/fun_plug.d/bin/transmission-daemon -f
2281 root     /mnt/HD_a2/fun_plug.d/bin/transmission-daemon -f
2282 root     /mnt/HD_a2/fun_plug.d/bin/transmission-daemon -f
3867 root     /mnt/HD_a2/fun_plug.d/bin/sh

KyleK wrote:

rap had the same problem, it turned out it was some error in his lighttpd.conf. I'm not sure though what it was exactly. I'm sure he can jump in and provide support shortly.

Hi Kylek,

currently i'm encountering the Daemon error, transmission daemon is not running. any idea what's the issue?

/mnt/HD_a2/ffp/start # transmission-remote -m
[warn] epoll_create: Function not implemented

export HOME='/'
export OLDPWD='/mnt/HD_a2/ffp'
export PATH='/ffp/sbin:/ffp/bin:/usr/sbin:/sbin:/usr/bin:/bin'
export PWD='/mnt/HD_a2/ffp/start'
export SHELL='/bin/sh'
export TERM='vt102'
export TRANSMISSION_HOME='/mnt/HD_a2/downloads/.transmission'
export USER='root'

Last edited by oasis (2008-04-18 07:08:26)