DSM-G600, DNS-3xx and NSA-220 Hack Forum

yes, that's possible... some are available for download at http://dev.skcserver.de/dns323/modules/

extending iptables on the other hand won't be soo easy, because nat support (for example) would require to recompile the whole kernel, and that is not possible (yet)...

I'm using netatalk to enable Apple Talk, however doing it with chroot. Can someone compile it so it works natively, without chroot?

Appletalk allows for additional characters in filenames that Samba doesn't.  Such as :.  I'm not saying that's better, but that is just how it is.

radiusweb wrote:

I'll be darned.  Yeah that went pretty smooth.  The compile produced all the modules I wanted.  And thanks for the link to the online modules!

radiusweb, did you (or could you) compile the modules for usbhid and usbhiddev?  I am looking for these modules to attach
an American Power Company (APC) Uninterruptible Power Supply (UPS) to the DNS_323 USB port, using the apcupsd software to
monitor the UPS power status

//Mig

Paul wrote:

yes, that's possible... some are available for download at http://dev.skcserver.de/dns323/modules/

extending iptables on the other hand won't be soo easy, because nat support (for example) would require to recompile the whole kernel, and that is not possible (yet)...

I'm looking for a methode to compile drivers (modules) direct on the target machin (DNS323). As the funplug packages are containing a toolchain with all the necessary tools included it should be possible isn't it.

When I just start a small c program see below:

Code : hello.c

           #include <linux/module.h>
           #include <linux/kernel.h>
           #include <linux/init.h>

          static int __init hello_start(void)
          {
          printk(KERN_INFO "loading hello module ...\n");
          printK(KERN_INFO "Hello world\n");
          retun 0;
          }

          static void __exit hello_end(void)
          {
          printK(KERN_INFO "goodbye Mr.\n");
          }

          module_init(hello_start);
          module_exit(hello_end);

end code

to compile this file I've made a Makefile as given below:

code: Makefile
          obj-m = hello.o
          KVERSION = $(shell uname -r)
          all:
                make -C /lib/modules/$(KVERSION)/build M=$(pwd) modules
          clean:
                make -C /lib/modules/$(KVERSION)/build M=$(pwd) clean
end code

the error message I got lauching the command 'make'  is the following:


               make: Nothing to be done for `all'.

First the kernel header files are missing on the DNS323. I think that the problem is situated at that level. I do not have found yet a way to install the header files for the kernel used on the DNS323.

Is there someone who can help me?

Thanks.

mig wrote:

radiusweb, did you (or could you) compile the modules for usbhid and usbhiddev?  I am looking for these modules to attach  an American Power Company (APC) Uninterruptible Power Supply (UPS) to the DNS_323 USB port, using the apcupsd software to monitor the UPS power status

I did... while I was trying get NUT working for a similar reason.

I've also successfully built NUT, but it seems my Mustek UPS isn't yet supported over USB, and since I can't even give it a try, I'm giving up on it for now.

I've attached the kernel module, hope it's useful. Happy hacking!

Last edited by kruzes (2008-07-16 00:50:55)

---

Attachments:
usbhid.ko.gz, Size: 20,486 bytes, Downloads: 1,285