Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Can't find any links to it, so here it is: http://www.station-drivers.com/telechar … 323.1.05b3(www.station-drivers.com).exe
Changes:
- Add Torrent module
- Add Jumbo Frame (3000 a 9000)
- Add Scandisk
- Add LLTD option
NOT tested yet...
Offline
link fixed
http://korturl.dk/qnx
its a exe file.
Offline
The scandisk one seems interesting. Who will be the guinea pig first? ![]()
Offline
Scandisk caused Problems with the CH3SNAS.
So it was removed from the Conceptronic Firmware.
Might be, that is causes problems in the D-Link firmware, too...
Offline
i think there are b28 lurking around
btw this is my speed with jumbo frame
Offline
245 mbps looks faster than I got using Jumbo frames with 1.04
http://dns323.kood.org/forum/t2156-1500-9000%3F.html
What speeds do you get without jumbo? Maybe there has been some performance improvements for the networking generally? (Taking out the old-fashioned socket options from the smb.conf file maybe - can you post the /etc/samba/smb.conf file?)
Offline
sjmac
I think when you get over 200 mbps you may need to start looking at the other side of the transfer as well.
Offline
sjmac wrote:
245 mbps looks faster than I got using Jumbo frames with 1.04
http://dns323.kood.org/forum/t2156-1500-9000%3F.html
What speeds do you get without jumbo? Maybe there has been some performance improvements for the networking generally? (Taking out the old-fashioned socket options from the smb.conf file maybe - can you post the /etc/samba/smb.conf file?)
without jumbo frames im getting around 160mbps to 170mbps
im using dir-655 which have no settings for jumbo frames
Offline
i tried out this firmware, didn't really seem compeletely stable, and mldonkey refused to start. Although, FunPlug was still working fine. I had to go back to 1.04.
Offline
redmodel wrote:
i tried out this firmware, didn't really seem compeletely stable, and mldonkey refused to start. Although, FunPlug was still working fine. I had to go back to 1.04.
its oni a b3
dlink mentioned that he will be releasing b28 aka v1.05 release soon
Offline