DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2007-02-15 00:13:04

magore
Member
Registered: 2007-01-05
Posts: 25

DNS323 U-BOOT monitor magic key sequence to enter monitor mode!

Hi,
   To break into U-BOOT monitor type the two keys <space bar> "1" within 3 seconds.
   That is the Space Key and the number 1

Offline

 

#2 2007-02-15 02:27:33

tobyg
Member
Registered: 2007-01-31
Posts: 42

Re: DNS323 U-BOOT monitor magic key sequence to enter monitor mode!

nice, worked like a charm.

Reseting !!
** LOADER **
** MARVELL BOARD: RD-88F5181-POS-NAS LE

U-Boot 1.1.1 (Nov 13 2006 - 14:01:34) Marvell version: 1.4.2

DRAM CS[0] base 0x00000000   size  64MB
DRAM Total size  64MB
[8192kB@ff800000] Flash:  8 MB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
*** Warning - bad CRC, using default environment


Soc: MV88F5181 Rev 3
CPU: ARM926 (Rev 0) running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz


Init usb device.
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Hit any key to stop autoboot:  0
Marvell>>
Marvell>> ?
?       - alias for 'help'
bootm   - boot application image from memory
cp      - memory copy
echo    - echo args to console
erase   - erase FLASH memory
loadb   - load binary file over serial line (kermit mode)
md      - memory display
printenv- print environment variables
run     - run commands in an environment variable
setenv  - set environment variables


So it looks like we can try creating our own firmware now... very cool indeed!

Last edited by tobyg (2007-02-15 02:28:51)

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB