Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hi, this is my first post in this forum (but I read it for several months). First of all, thanks to all of you, who contribute in this, and particularly to fonz, and his funplug. Secondly, I apologize for the English mistakes I'll probably make.
OK, that's done. Now, the subject of my post:
Currently, I run a 1.04 F/W on my DNS-323 (from the French website), and i wonder if I can run the 1.05 one, from the US support site, without brick anything in my configuration, or if I should wait for D-link to release it in the French support website.
Thanks for your answers, regards.
Offline
Welcome to the Forum...
I have the FW from the us site on my Swedish DNS and it is working as it should be. So there should be no problems for you.
Last edited by Minglarn (2008-05-31 18:16:26)
Offline
OK, thank you. I will try that, and I'll tell you the result.
Offline
mm, it seems that there were a problem. In fact, I didn't had any error message or anything, but the configuration panel tells me that the current firmware is still 1.04, and not 1.05 as expected. Does someone have an idea?
Offline
interesting... Never happend to me. I've upgraded from 1.03 to 1.04, later on to 1.4b and finaly to 1.05 from the US site.
Offline
I tried again, and nothing new happened. Is it possible that the update ran well, without changing the version number in the interface? Does exists another way to know which version I run?
Offline
One tip... Clean the cache in IE or FireFox, then try to access your NAS. It could be old pages showing up in your browser....
Offline
Minglarn wrote:
One tip... Clean the cache in IE or FireFox, then try to access your NAS. It could be old pages showing up in your browser....
I just tried, and it's not the cache. Thank you for the idea. i wonder if the cause could be a process running on the NAS (i don't think so, but ...). I make an attempt without any program running.
Offline
Oh. I have very interesting news. i was first unable to restart the nas without funplug services. Even with
chmod -x /mnt/HD_a2/fun_plug
, when i restarted the nas, i had all the services (like telnet, lighttp, ...) running. I had to delete ffp/ directory and restart to disable them. And the other interesting thing: after that I can see in the configuration panel that my firmware is 1.05.
I don't really understand this, but it seems that at least one application causes the trouble. but I'm not able to say what. This is the list of executables scripts in my /ffp/start folder:
cleanboot.sh, editcron.sh, fanctrl.sh, lighttpd.sh, optware.sh, passwd.sh, rcS.sh, rsyncd.sh, shells.sh, telnetd.sh, transmission.sh
Offline
I reinstalled funplug, everything seems to be OK. I still can't understand why I had this problem, i hope it's over. Let's wait and see.
Offline