Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
First im i noob on linux. But followed the guide. made an install of utelnet-kit.tar. Can connect with puttytel. And got a new folder(ffp) on disk 2.
But when i try to install twonky nas i only get your not loged in invalid user and password. What password does it want.
Offline
Eskimo wrote:
First im i noob on linux. But followed the guide. made an install of utelnet-kit.tar. Can connect with puttytel. And got a new folder(ffp) on disk 2.
But when i try to install twonky nas i only get your not loged in invalid user and password. What password does it want.
How are you installing twonky? Via the executable setup? I remember I had a similar problem once before. If I remember correctly, you shouldn't need a user name or password. Secondly, make sure you aren't connected via telnet at the time you try to install.
Hope that helps
Offline
I use the nassetup.exe from twonkymedia. This is what goes on .
put in the ip of the dns and leave user and password emty.
comes back
installing from 192.168.0.4(PC) to 192.168.0.7(DNS 323)
220--------------------Welcome to Pure Ftpd(TLS)
220------------------- 1 of 10 user is allowed
220 local time is now 18.15 Server port 23
220 You will be disconnected in 10 minutes of inactivity
invalid USER OR PASSWORD
Offline
Hi Eskimo,
I had the same problem. My solution was to enter the user and password used when accessing the dns via telnet. The password had to be an actual password, and couldn't be simply left blank.
Offline