Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I just installed the fun plug at volume 1;
Copy fun_plug and fun_plug.tgz to Volume 1 and reboot. If
successful, the fun_plug.tgz file is unpacked (ffp directory) and
deleted. A telnet server is started.
After rebooting the 323, the folder isn't unpacked and still there.
Anybody has a clue?
Offline
Yes - and what you need to do is use the search button at the top of the page to find the solution.
Normally Volume_1 is the drive in the right bay, but, depending on which bay (left or right) you put the first disk in to, it is possible for Volume_1 to be the drive in the left bay, so when you copy fun_plug etc. to Volume_1 it goes on the wrong drive and when you reboot, nothing happens.
Last edited by fordem (2008-08-09 23:57:18)
Offline
thks, this was the problem and you helped me out.
My problem is that there is not much information for a beginner with no linux experiene. Now I don't know where to start.
Now i have installed the funplug and have a telnet acces via putty.
I want to install sabnzb but don't know how to make the first steps.
Offline
borgoe wrote:
My problem is that there is not much information for a beginner with no linux experiene.
You might want to start here: http://dns323.kood.org/forum/t2648-Gett … Linux.html
Offline