Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I have two HDD in my DNS 323
1 120gb seagate in slot 0 (left)
1 500gb seagate in slot 1 (right)
So, how do I make the 500 gb seagate to be volume 2 instead of volume 1?
What are the steps?
My goal : install transmission on it and download on the 120 gb hdd instead of the 500 gb hdd
btw, my DNS is hot to touch, is it normal , will that affect the drives?
Offline
Swap the drives from left to right and the volume names should change - as for the temperature - how hot is hot?
Seriously - one person's idea of hot may not be another's - mine never gets more than just warm and that is with it running pretty much 24/7, although it is in "sleep" mode most of that time. You can get a numeric temperature reading fron the status page mines runs around 114*F (46*C) and I'm comfortable with that.
Offline
I have two HDD in my DNS 323
1 120gb seagate in slot 0 (left)
1 500gb seagate in slot 1 (right)
You have this backwards. Slot 0 is on the right and slot 1 is the left -- Hence why the 500GB is Volume_1.
Last edited by bq041 (2008-08-17 07:00:56)
Offline
i am getting a reading of 47 degress... is it high?
Offline