Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Pages: 1
Hi,
I've been running TwonkyMedia 4.4.5 on my dns 323 firmware 1.05 now for a while. It has worked a treat streaming out to my xbox 360 and never misses a beat. That is until i installed a second drive (1tb seagate). This drive was recognised by the config software, formatted as a second drive using JBOD and was able to be mounted as volume_2. All good!
Unfortunately my telnet server and twonkymeda software stopped running. If i removed the second drive, TwonkYMedia and Telnet start. If i put it back in, they dont start! Is there some change i should make in the fun_plug script or another file?
Can anyone shed any light on why TwonkyMedia and telnet only work with one drive installed.
thanks
Matt
Offline
You rock dude... that did the trick. funny being that the dns doco says to mount the 1st in the left and 2nd on the right.. ah well.. everything is working perfectly now.
thanks heaps!
Offline
Pages: 1