DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2008-10-17 13:34:18
- cdk
- Member
- Registered: 2008-10-15
- Posts: 14
No data access - can't set workgroup and shares
Hi,
please excuse if this issue was answered before but I couldn't find any helpful information about that, because there's so much stuff in this forum I don't know about by far.
The first problem was that I changed both drives (now I know I shouldn't have done that). After that the web-UI always wanted to format them although all data was accessible and I could resync my RAID1 manually.
Three days and three nights later I finally succeeded in fixing that behaviour by editing countless hd_magic_num, raidtab and raidtab2web files.
But now my "next generation problem" is that the CH3SNAS lost its settings for workgroup and shares by that. Changing them by web-ui doesn't work and loading the configuration file neither. I can only change it's name.
If I use another virgin harddisk it works, but not with the set of drives which contains my current data.
Can anybody help?
Last edited by cdk (2008-10-17 13:41:41)
Offline
#2 2008-10-18 01:41:34
- cdk
- Member
- Registered: 2008-10-15
- Posts: 14
Re: No data access - can't set workgroup and shares
I found out that this is a samba issue. After creating an /etc/samba/smb.conf I suddenly can set the workgroup name. But after rebooting the NAS everything's forgotten again. Ok, as far as I know this is the ramdisk, so naturally it won't survive a reboot.
Now I think the smb.conf must be copied from somewhere (on disk?) to /etc/samba/ while booting. But from where? Where is it missing?
Offline
#3 2008-10-19 18:11:18
- bq041
- Member
- From: USA
- Registered: 2008-03-19
- Posts: 709
Re: No data access - can't set workgroup and shares
It should be coming from Flash.
DNS-323 F/W: 1.04b84 H/W: A1 ffp: 0.5 Drives: 2X 400 GB Seagate SATA-300
DNS-323 F/W: 1.05b28 H/W: B1 ffp: 0.5 Drives: 2X 1 TB WD SATA-300
DSM-G600 F/W: 1.02 H/W: B Drive: 500 GB WD ATA
Offline
#4 2008-10-19 18:33:25
- cdk
- Member
- Registered: 2008-10-15
- Posts: 14
Re: No data access - can't set workgroup and shares
It should be coming from Flash.
From where in the Flash exactly? Sorry, I'm a noob... 
Offline