DSM-G600, DNS-3xx and NSA-220 Hack Forum

hello,

i just tried to upgrade from funplug 0.3 to 0.5 (because cleanboot didn´t work fine with 0.3) and followed the instructions in http://dns323.kood.org/howto:ffp#upgrad … m_0.3_0.4. so i copied the files "fun_plug" an "fun_plug.tgz" to volume_1 (i overwrote the old "fun_plug" file). but after restarting the device by webinterface, i can´t access it. telnet does´nt work, the smb shares are not accessable, just the webinterface is available.

and here is the real problem:
in the webinterface i see:
HARD DRIVE INFO
Volume Name:     Volume_1
Volume Type:     RAID 1
Sync Time Remaining:     37.8 minute(s)
Total Hard Drive Capacity:     0 MB                      (???? there are two 500gb disks installed)
Used Space:     0 KB                                      (???? omg, where is my data)
Unused Space:     1346 MB

after some reloads sometimes i see:
Volume Name:     Volume_1
Volume Type:     RAID 1
Sync Time Remaining:     33.0 minute(s)
Total Hard Drive Capacity:     546 MB                  (??? there are two 500gb disks installed) 
Used Space:     546 MB
Unused Space:     -1122951 MB                          (???)

my firmware version is:
1.04
0822.2008

i use two 500gb disks with raid 1.

please, help! what to do now?
i´don´t think that after resyncing is finished everything will be fine...

thanks in advance!