Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I installed a Hitachi Deskstar 500GB drive about a week ago without problems (upgraded firmware to 1.06). I have decided to add a second drive (identical).
When I inserted the new drive, the drive light on the box blinks continuously, and the configuration utility does not recognize the drive (the original drive is still recognized). When I go into the system configuration, I don't see any option for formatting the new drive.
I have tried swapping the position of the hard drives, doing a hard-reset and a software reset. Do I need to format the drive in a computer first? Or is there a way to force the 323 to format it?
I know this may already be posted somewhere, but I have searched and cannot find it. Please help by pointing to the applicable post.
Thank you for any help.
Shane
Offline
Certain drives have a delayed spin up. Try powering on your device, then log into the web UI. Do a soft reset from the web UI. Then check and see if your drive is detected.
Offline
That didn't work. I tried putting the drive in my computer, and the computer did not recognize it as a drive. I think there may be a problem with the drive, or perhaps the D-Link box damaged it somehow (pure uneducated speculation).
Offline