DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2007-04-20 20:39:17
- BobE
- Member
- From: NJ, USA
- Registered: 2007-03-24
- Posts: 21
UPnP: Automatically runs?
Anyone notice that even when they have UPnP disabled via the web interface they occasionally will see a line in the ps -ef with: /sys/custom/upnp/upnp 0 D-Link Corp http://www...... ??? I've done a kill -9 on it several times now and also confirmed that I still have the service disabled on the web interface. Do I need to worry about this?
Thanks in advance!
DNS-323 2x Western Digital WD5000AAKS 500GB SATAII (3.0Gb/s) 7200RPM 16MB RAID1 FW1.03 ext2
DNS-323 A1 | FW1.09 | 2x WD20EVDS AV-GP 2TB SATA 3.0Gb/s 7200RPM, 32MB | RAID1 | ext3 | ffp 0.5, Samba 3.4.6-1
NSA-220+ | FW3.23 | 2x WD15EADS Green 1.5TB SATA 3.0Gb/s 7200RPM, 32MB | RAID1 | ext3 | External USB: Kingston DT1 2GB Flash Drive ( ffp 0.5 )
Offline
#2 2007-04-20 23:30:42
- Aaron
- Member
- Registered: 2007-02-09
- Posts: 53
Re: UPnP: Automatically runs?
*Edit* Just checked and there is no option to disable UPNP on the device only UPNP AV. Even if you disable UPNP AV the device will still broadcast UPNP to be discovered on the network.
-Aaron
Last edited by Aaron (2007-04-20 23:32:37)
Offline
#3 2007-04-21 04:37:01
- BobE
- Member
- From: NJ, USA
- Registered: 2007-03-24
- Posts: 21
Re: UPnP: Automatically runs?
Thanks Aaron...so that process is just the broadcast to say I'm here. It looks the exact same as when you enable the AV service (at least based on what one sees when executing a ps command) - which is why I was confused. Much appreciated!
DNS-323 A1 | FW1.09 | 2x WD20EVDS AV-GP 2TB SATA 3.0Gb/s 7200RPM, 32MB | RAID1 | ext3 | ffp 0.5, Samba 3.4.6-1
NSA-220+ | FW3.23 | 2x WD15EADS Green 1.5TB SATA 3.0Gb/s 7200RPM, 32MB | RAID1 | ext3 | External USB: Kingston DT1 2GB Flash Drive ( ffp 0.5 )
Offline