DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
• DSM-G600: Wiki - Main Page |
Downloads |
SVN
•
DNS-323: Wiki |
Downloads
•
IRC Channel #funplug on irc.freenode.org
IRC Channel #funplug on irc.freenode.org
#1 2009-02-26 04:52:06
- fatal
- New member
- Registered: 2009-02-25
- Posts: 4
Amber/Purple Flashing Lights
Hello,
I noticed this evening that both HD LEDs are flashing Amber/Purple... there is data being copied to it right now and I can access both drives..
There are two 1TB drives not doing any raid, just standard.. what does that mean? I read that amber is not a good sign...any ideas? The status does not tell me anything..
Offline
#2 2009-02-26 05:50:48
- bq041
- Member
- From: USA
- Registered: 2008-03-19
- Posts: 709
Re: Amber/Purple Flashing Lights
Mine have occasionally done this, too. Once all data has finished copying, I have rebooted and then it is fine again. Could just be a glitch. Since you stil have access, now would be a great time to make a backup.
DNS-323 F/W: 1.04b84 H/W: A1 ffp: 0.5 Drives: 2X 400 GB Seagate SATA-300
DNS-323 F/W: 1.05b28 H/W: B1 ffp: 0.5 Drives: 2X 1 TB WD SATA-300
DSM-G600 F/W: 1.02 H/W: B Drive: 500 GB WD ATA
Offline
#3 2009-02-27 00:23:10
- devotee
- Member
- From: Valencia, Spain
- Registered: 2008-12-12
- Posts: 43
Re: Amber/Purple Flashing Lights
Check this: Pink leds: (one possible) cause and solution 
CH3SNAS • 2x Seagate Barracuda ES 7200.11 ST31000340AS 1TB SATAII (3.0Gb/s) 7200RPM 32MB (Rev: SD1A) • Individual volumes • FW1.05 (Firmware Date: 12/31/2008) • ext2
Offline