Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Pages: 1
Hi all. Good day to you all. I just bought a D-Link NAS DNS-323 with a 500GB Hdd. I have setup accordingly to the manual and upgraded the firmware to version 1.06.
I have a question to seek for help. I have place 4-5 torrent files to the Bittorent download page. I notice for one/two days the status of bittorrent download is "0" for both uploading and downloading. Is there any setup error or things i didn't do? I even tried just add one torrent file but still not working.
If i place those files in my notebook's bitcomet, it runs. Anyone experience the same problem as myself?
Thanks for the help in advance. ![]()
Offline
Have you forwarded the port you are using?
You have to forward the DNS-323 Bittorrent port in your router, so incomming connection can see the DNS-323 bittirrent.
Offline
Hi Bravo, I would like to share my settings with you. Hope you can let me know where have i set wrongly.
My hardware setup are as follow:-
a) Aztech ADSL Modem
b) 3Com wireless router
c) D-Link DNS-323
The settings for 3Com on port forwarding is as follows (as follows instruction at portforwarding.com):-
a) Name : Torrent1 (this is for my notebook IP address)
Static IP: 192.168.2.20
Port: 12550
b) Name : Torrent2 (this is set for DNS-323)
Static IP: 192.168.2.191
Port: 12540
Settings on DNS-323 for Bittorrent are as follows:-
Incoming port: 12540
Ip address: 192.168.2.191
Subnet: 255.255.255.0
Gateway: 192.168.2.1
DNS: nil
DNS: nil
I have not tried using Transmission. Do i need to use it to run bittorrent on DNS-323?
Thank you for your help. Appreciate lots. ![]()
Offline
Pages: 1