Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Pages: 1
Hi,
I recently had to replace one drive and had to create my second volume manually. Everything is working now, except that the webinterface still wants to format the new harddrive. However, everything is already formatted, the RAID is in sync and the Volume_2 is up and running.
How can I tell the webinterface to accept the configuration as it is?
I can press the "Skip" button and just use the webinterface as normal, however, I am not very happy with this solution as it is very dangerous that it asks me everytime after login to format the drive....
any ideas?
thanks,
bye
Marcus.
Offline
Hi eMarcus,
I've experienced the same problem. This was discussed here : http://dns323.kood.org/forum/viewtopic.php?id=3393
The only way I found to avoid this is to automatically create these two files after each boot :
/web/hddok_b
/web/hddok
Offline
Thanks,
That did the trick!
bye
me.
Offline
The problem is that your config files on the 4th partition and / or flash do not match. To actually fix the problem, you need to properly setup the files.
Offline
Pages: 1