DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2009-04-02 08:02:58

iazmin
Member
Registered: 2008-09-10
Posts: 55

HELP:My lighttpd is not running at all!

I just need to reinstall fun_plug on my DNS-323. Follow all the standard steps as usual however. now my lighttpd is not running. Please see the screen shot below:

Code:

root@nashawa:/mnt/HD_a2/ffp/start# sh lighttpd.sh status
lighttpd not running

root@nashawa:/mnt/HD_a2/ffp/start# sh lighttpd.sh start
Starting /ffp/sbin/lighttpd -f /ffp/etc/lighttpd.conf
root@nashawa:/mnt/HD_a2/ffp/start# ps -A | grep lighttpd
 1623 root     /ffp/sbin/lighttpd -f /ffp/etc/lighttpd.conf
 1624 root     [lighttpd]
 1625 root     [lighttpd]
 1662 root     grep lighttpd

root@nashawa:/mnt/HD_a2/ffp/start# sh lighttpd.sh stop
Stopping lighttpd

root@nashawa:/mnt/HD_a2/ffp/start# sh lighttpd.sh start
Starting /ffp/sbin/lighttpd -f /ffp/etc/lighttpd.conf

root@nashawa:/mnt/HD_a2/ffp/start# sh lighttpd.sh status
lighttpd not running

root@nashawa:/mnt/HD_a2/ffp/start#

From the code above even when I checked the status, it just shows it is not running at all. And I never seem to see this message before when to start lighttpd:

Code:

Starting /ffp/sbin/lighttpd -f /ffp/etc/lighttpd.conf

I just have no idea what is wrong here...

Offline

 

#2 2009-04-02 16:37:25

iazmin
Member
Registered: 2008-09-10
Posts: 55

Re: HELP:My lighttpd is not running at all!

I realized that if I used lighttpd.conf without the php enable, then the lighttpd will run perfectly as shown below:

Code:

/mnt/HD_a2/ffp/etc # sed -i '/server.port/ s/^/#/' lighttpd.conf
/mnt/HD_a2/ffp/etc # cd /ffp/start/
/mnt/HD_a2/ffp/start # sh lighttpd.sh stop
Stopping lighttpd
/mnt/HD_a2/ffp/start # sh kickwebs.sh start
Kicking webs ...
/mnt/HD_a2/ffp/start # sh lighttpd.sh start
Starting /ffp/sbin/lighttpd -f /ffp/etc/lighttpd.conf
/mnt/HD_a2/ffp/start # sh lighttpd.sh status
lighttpd running as pid 2025

If then I uncomment those codes to enable php, immediately the lighttpd wouldn't run. what wrong? so strange? it never happen to me before? any may to rectify this?

Offline

 

#3 2009-04-02 17:51:20

iazmin
Member
Registered: 2008-09-10
Posts: 55

Re: HELP:My lighttpd is not running at all!

Solved this. It is because I forgot to install php-5.2.6-3.tgz since fun_plug 0.5 default installation doesn't include php. So I have to install manually using the funpkg -i

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB