DSM-G600, DNS-3xx and NSA-220 Hack Forum

I have several DNS-323's

The one in question has a WD 1TB and Seagate 1TB...

Both ARE working and the RAID array is up and sync!

But the DNS-323 web page only shows the Seagate one under PHYSICAL DISK INFO :

The other is ommitted when just above it says that the raid has 2 disks...Weird!

Here is Smartmon.....
smartctl version 5.38 [arm-unknown-linux-uclibc] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.11
Device Model:     ST31000340AS
Serial Number:    XXXXX
Firmware Version: SD15
User Capacity:    1,000,204,886,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Tue Jan 27 02:54:43 2009 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

root@BRET-NAS-01:~# smartctl -i -d marvell /dev/sdb
smartctl version 5.38 [arm-unknown-linux-uclibc] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD10EACS-00D6B0
Serial Number:    XXXXXXXXXXX
Firmware Version: 01.01A01
User Capacity:    1,000,204,886,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Jan 27 02:54:48 2009 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


This is just bugging me whay it would not show in the Web Interface...

BH