Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I just wondering why the nut (Network UPS Tool) can not load the driver after I run "upsdrvctl start" . I am using USB HUB since my ffp is running from USB stick. Even if I run ffp directly from HDD (with the UPS USB directly connected to the USb port), still the same error message appears.
From dmesg, this is the error message:
usb 1-1.1: usbfs: process 2425 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2425 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2318 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2318 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2425 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2425 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2318 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2318 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2425 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2425 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2318 (megatec_usb) did not claim interface 0 before use usb 1-1.1: usbfs: process 2318 (megatec_usb) did not claim interface 0 before use
Offline