DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
Pages: 1
- Index
- » DNS-323/321 Discussion
- » Mounting a large hard disk via the usb port of the DNS-323?
#1 2009-06-10 17:14:19
- JackShepard
- Member
- Registered: 2007-10-03
- Posts: 37
Mounting a large hard disk via the usb port of the DNS-323?
Hi there!
Because I want to change the partition size of the hard disks, which are currently installed in my NAS, I bought a new 500 Gb hard disk. After formating the disk using a gparted-live cd I connected the drive with a usb-to-sata converter to the usb port of the DNS. Afterwards I was able to mount the partition. But if I try to copy any data to that partition I'm only getting an input / output error. Does somebody has an idea what might be going
wrong here? Is there a better way to get my data to the new hard disk?
BR,
Markus
Offline
#2 2009-06-10 17:23:08
- michalzxc
- Member
- Registered: 2008-08-04
- Posts: 9
Re: Mounting a large hard disk via the usb port of the DNS-323?
Try to use active usb hub. Without it I had input / output errors even with pendrive
Offline
#3 2009-06-15 10:40:39
- JackShepard
- Member
- Registered: 2007-10-03
- Posts: 37
Re: Mounting a large hard disk via the usb port of the DNS-323?
With an active usb I was able to mount the drive, but after some hours of copying the usb connection isn't available any longer. Therefore the copy process (cp -a /mnt/HD_a2 /mnt/<mountpoint>) fails ... 
BTW: The usb stick on which the funplug environment is installed was connected to that hub, too.
Last edited by JackShepard (2009-06-15 10:49:26)
Offline
Pages: 1
- Index
- » DNS-323/321 Discussion
- » Mounting a large hard disk via the usb port of the DNS-323?