DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

Pages: 1

 

#1 2009-07-10 06:31:43

dll2002dll
Member
Registered: 2009-07-10
Posts: 10

DNS-323 Mounting usb hard disk failed: Invalid argument

Hey guys,

I am using fun_plug 0.5 on my DNS-323 Firmware 1.07, I tried attaching a usb fat drive and I am getting failed:invalid argument message, when I try to mount the drive, any help would be appreciated. Thanks.

Code:

root@DNS323:~#insmod /mnt/HD_a2/lnx_bin/usb-storage.ko
root@DNS323:~#insmod /mnt/HD_a2/lnx_bin/ntfs.ko
root@DNS323:~# mount -t vfat -o umask=0 /dev/sdc1 /mnt/HD_a2/usb_drive
mount: mounting /dev/sdc1 on /mnt/HD_a2/usb_drive failed: Invalid argument
root@DNS323:~#

Here is the dmesg output:

Code:

Initializing USB Mass Storage driver...
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x0bc2, Product: 0x0502, Revision: 0x0200
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: *** thread sleeping.
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage:  12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
  Vendor: ST340083  Model: 2A                Rev: 4.40
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage:  25 00 00 00 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
sdc: assuming drive cache: write through
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x4 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage:  25 00 00 00 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x5 L 8 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
sdc: assuming drive cache: write through
 sdc:<7>usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage:  28 00 00 00 00 00 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0x6 L 4096 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
NTFS driver 2.1.22 [Flags: R/O MODULE].
usb-storage: Status code 0; transferred 4096/4096
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
 sdc1
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,  type 0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0:1)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage:  28 00 00 00 00 3f 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x8 L 512 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
usb-storage: Status code 0; transferred 512/512
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: device scan complete
root@DNS323:~#

Offline

 

#2 2009-07-10 20:59:13

hell0
Member
From: .de
Registered: 2008-05-13
Posts: 81

Re: DNS-323 Mounting usb hard disk failed: Invalid argument

dll2002dll wrote:

root@DNS323:~#insmod /mnt/HD_a2/lnx_bin/ntfs.ko
root@DNS323:~# mount -t vfat -o umask=0 /dev/sdc1 /mnt/HD_a2/usb_drive

FAT or NTFS? wink

Last edited by hell0 (2009-07-10 20:59:27)

CH3SNAS firmware 1.05 with WD1000FYPS and ffp 0.5 on USB Stick

Offline

 

#3 2009-07-11 04:07:43

dll2002dll
Member
Registered: 2009-07-10
Posts: 10

Re: DNS-323 Mounting usb hard disk failed: Invalid argument

I think its FAT32, is there a command line to it without mounting it?

On other hand, it is connected (mounted) to my WDTV which is running busybox, I can issue the command there to find out what FS it is.

Offline

 

#4 2009-07-23 01:59:51

dll2002dll
Member
Registered: 2009-07-10
Posts: 10

Re: DNS-323 Mounting usb hard disk failed: Invalid argument

Hi guys,

I have given it another try, this time the USB hard disk is NTFS, can someone please let me know what I am doing wrong?

Code:

root@DNS323:~# insmod /mnt/HD_a2/lnx_bin/usb-storage.ko
root@DNS323:~# insmod /mnt/HD_a2/lnx_bin/ntfs.ko
root@DNS323:~# 
root@DNS323:~# mount -t ntfs /dev/sdc1 /mnt/HD_a2/usb_drive
mount: mounting /dev/sdc1 on /mnt/HD_a2/usb_drive failed: No such device or address
root@DNS323:~# dmesg
Linux version 2.6.12.6-arm1 (ffna@SWTEST2) (gcc version 3.3.3) #31 Thu Mar 26 18:20:41 CST 2009
CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ)
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
Machine: MV-88fxx81
Using UBoot passing parameters structure
Sys Clk = 166000000, Tclk = 166000000
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:7
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB 0MB 0MB 0MB = 64MB total
Memory: 55352KB available (2519K code, 451K data, 112K init)
Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 6289K
NET: Registered protocol family 16

  Marvell Development Board (LSP Version 1.7.6_NAS)-- RD-88F5182-NAS-2 

 Detected Tclk 166000000 and SysClk 166000000 
Marvell USB EHCI Host controller #0: c03beb00
Marvell USB EHCI Host controller #1: c03bea40
pexBarOverlapDetect: winNum 2 overlap current 0
mvPexInit:Warning :Bar 2 size is illigal
it will be disabled
please check Pex and CPU windows configuration
PCI: bus0: Fast back to back transfers enabled
PCI: bus1: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
cesadev_init(c0012498)
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.3 (2007/10/31) Phillip Lougher
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
loop: loaded (max 8 devices)
Marvell Gigabit Ethernet Driver 'egiga':
  o Ethernet descriptors in DRAM
  o DRAM SW cache-coherency
  o Checksum offload enabled
  o Loading network interface 'egiga0' 
Intergrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
  Vendor: Seagate   Model: ST31500341AS      Rev: CC1H
  Type:   Direct-Access                      ANSI SCSI revision: 03
  Vendor: Seagate   Model: ST31500341AS      Rev: CC1H
  Type:   Direct-Access                      ANSI SCSI revision: 03
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
physmap flash device: 800000 at ff800000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition definition
Creating 5 MTD partitions on "phys_mapped_flash":
0x00000000-0x00010000 : "MTD1"
0x00010000-0x00020000 : "MTD2"
0x00020000-0x001a0000 : "Linux Kernel"
0x001a0000-0x007d0000 : "File System"
0x007d0000-0x00800000 : "u-boot"
ehci_platform ehci_platform.20865: EHCI Host Controller
ehci_platform ehci_platform.20865: new USB bus registered, assigned bus number 1
ehci_platform ehci_platform.20865: irq 17, io mem 0x00000000
ehci_platform ehci_platform.20865: park 0
ehci_platform ehci_platform.20865: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_platform ehci_platform.86401: EHCI Host Controller
ehci_platform ehci_platform.86401: new USB bus registered, assigned bus number 2
ehci_platform ehci_platform.86401: irq 12, io mem 0x00000000
ehci_platform ehci_platform.86401: park 0
ehci_platform ehci_platform.86401: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 112K
SCSI device sda: 2930277168 512-byte hdwr sectors (1500302 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 2930277168 512-byte hdwr sectors (1500302 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 2930277168 512-byte hdwr sectors (1500302 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 2930277168 512-byte hdwr sectors (1500302 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb3 sdb4
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
egiga0: mac address changed
egiga0: link down
egiga0: link up<5>, full duplex<5>, speed 100 Mbps<5>
Adding 530104k swap on /dev/sda1.  Priority:-1 extents:1
Adding 530104k swap on /dev/sdb1.  Priority:-2 extents:1
ext3: No journal on filesystem on sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sda2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Can't find ext3 filesystem on dev sdb3.
VFS: Can't find an ext2 filesystem on dev sdb3.
VFS: Can't find ext3 filesystem on dev sdb3.
VFS: Can't find an ext2 filesystem on dev sdb3.
md: md0 stopped.
md: md1 stopped.
md: md0 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md0 active with 2 out of 2 mirrors
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
md: mdadm(pid 1701) used obsolete MD ioctl, upgrade your software to use new ictls.
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NTFS driver 2.1.22 [Flags: R/O MODULE].
root@DNS323:~#

Offline

 

#5 2009-07-25 04:02:01

dll2002dll
Member
Registered: 2009-07-10
Posts: 10

Re: DNS-323 Mounting usb hard disk failed: Invalid argument

Any help guys?

Here is the latest log output:

root@DNS323:~# dmesg

root@DNS323:~# insmod /mnt/HD_a2/lnx_bin/usb-storage.ko

root@DNS323:~# dmesg
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.

root@DNS323:~# dmesg
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.

root@DNS323:~# mount -t ntfs /dev/sdc1 /mnt/HD_a2/usb_drive
mount: mounting /dev/sdc1 on /mnt/HD_a2/usb_drive failed: No such device

root@DNS323:~# mount -t ntfs /dev/sdc1 /mnt/HD_a2/usb_drive

root@DNS323:~# dmesg
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.

root@DNS323:~# insmod /mnt/HD_a2/lnx_bin/ntfs.ko

root@DNS323:~# dmesg
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NTFS driver 2.1.22 [Flags: R/O MODULE].

root@DNS323:~# mount -t ntfs /dev/sdc1 /mnt/HD_a2/usb_drive
mount: mounting /dev/sdc1 on /mnt/HD_a2/usb_drive failed: No such device or address

root@DNS323:~# dmesg
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NTFS driver 2.1.22 [Flags: R/O MODULE].
root@DNS323:~#

root@DNS323:~# dmesg
usb 1-1: new high speed USB device using ehci_platform and address 2
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x0bc2, Product: 0x0502, Revision: 0x0200
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: *** thread sleeping.
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage:  12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
  Vendor: ST340083  Model: 2A                Rev: 4.40
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage:  25 00 00 00 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
sdc: assuming drive cache: write through
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x4 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage:  25 00 00 00 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x5 L 8 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
sdc: assuming drive cache: write through
sdc:<7>usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage:  28 00 00 00 00 00 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0x6 L 4096 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
usb-storage: Status code 0; transferred 4096/4096
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
sdc1
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,  type 0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0:1)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: device scan complete
root@DNS323:~#

root@DNS323:~# mount -t ntfs /dev/sdc1 /mnt/HD_a2/usb_drive
root@DNS323:~# dmesg
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
sdc: assuming drive cache: write through
sdc:<7>usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage:  28 00 00 00 00 00 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0x6 L 4096 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
usb-storage: Status code 0; transferred 4096/4096
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
sdc1
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,  type 0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0:1)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: device scan complete
getblk(): invalid block size -1036789120 requested
hardsect size: 512
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c05ac000
[00000000] *pgd=00fce031, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1]
Modules linked in: ntfs usb_storage usblp sd_mod
CPU: 0
PC is at __bread+0x10/0x30
LR is at __getblk_slow+0x98/0x17c
pc : [<c0090974>]    lr : [<c00903fc>]    Not tainted
sp : c157fdf4  ip : 00000000  fp : c157fe00
r10: c20db000  r9 : c20db000  r8 : 2e937c82
r7 : 00000001  r6 : c20db000  r5 : c233da80  r4 : c1aa5600
r3 : c029e9a4  r2 : 00000000  r1 : 004b19c9  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  Segment user
Control: A005317F  Table: 005AC000  DAC: 00000015
Process mount (pid: 32545, stack limit = 0xc157e194)
Stack: (0xc157fdf4 to 0xc1580000)
fde0:                                              c157fe24 c157fe04 bf031928
fe00: c0090974 00000000 c233da80 c20db000 c1aa5600 00000001 c157fe50 c157fe28
fe20: bf033320 bf03190c c2c2f91c c1aa5600 c2c2f900 00008000 c20db000 c20db000
fe40: c20db000 c157fe94 c157fe54 c009575c bf0331cc 31636473 ffffff00 c286b000
fe60: c2d3ebc0 0000000a c0e35cc0 c2d3ebc0 c286b000 c0e35cc0 c286b000 fffffff4
fe80: bf03b99c 00008000 c157fea8 c157fe98 bf0339ac c009564c bf0331bc c157fed0
fea0: c157feac c00959a8 bf0339a0 ffffffff c286b000 c20db000 00008000 c157ff08
fec0: 00000000 c157fef8 c157fed4 c00ac02c c0095958 00008000 00000000 c1cb2000
fee0: 00000000 c286b000 c157ff08 c157ff70 c157fefc c00ac6f8 c00abfb8 c286b000
ff00: c20db000 c16c5000 c1720114 c0e35b40 c20db000 c157ff78 00008000 00000001
ff20: 00000001 00000000 c157ff54 c157ff40 c00ac56c c0256ae8 20000013 c00ac4fc
ff40: 00001000 c157ff70 00000000 00000000 beb92e8a c1cb2000 00008000 c157e000
ff60: 000b1018 c157ffa4 c157ff74 c00acb20 c00ac5b8 c20db000 c20db000 c286b000
ff80: c16c5000 000b1018 beb92e94 beb92e85 00000015 c0024f44 00000000 c157ffa8
ffa0: c0024dc0 c00aca8c 000b1018 c002c9f4 beb92e8a beb92e94 beb92e85 00008000
ffc0: 000b1018 beb92e94 beb92e85 000b1018 00008000 beb92da0 000b1018 00000000
ffe0: 400526cc beb92748 0004ef6c 400526d8 20000010 beb92e8a 40029a44 40029ab4
Backtrace:
[<c0090964>] (__bread+0x0/0x30) from [<bf031928>] (read_ntfs_boot_sector+0x2c/0x26c [ntfs])
[<bf0318fc>] (read_ntfs_boot_sector+0x0/0x26c [ntfs]) from [<bf033320>] (ntfs_fill_super+0x164/0x7ac [ntfs])
r8 = 00000001  r7 = C1AA5600  r6 = C20DB000  r5 = C233DA80
r4 = 00000000
[<bf0331bc>] (ntfs_fill_super+0x0/0x7ac [ntfs]) from [<c009575c>] (get_sb_bdev+0x120/0x17c)
[<c009563c>] (get_sb_bdev+0x0/0x17c) from [<bf0339ac>] (ntfs_get_sb+0x1c/0x24 [ntfs])
r8 = 00008000  r7 = BF03B99C  r6 = FFFFFFF4  r5 = C286B000
r4 = C0E35CC0
[<bf033990>] (ntfs_get_sb+0x0/0x24 [ntfs]) from [<c00959a8>] (do_kern_mount+0x60/0x108)
[<c0095948>] (do_kern_mount+0x0/0x108) from [<c00ac02c>] (do_new_mount+0x84/0xb8)
[<c00abfa8>] (do_new_mount+0x0/0xb8) from [<c00ac6f8>] (do_mount+0x150/0x16c)
[<c00ac5a8>] (do_mount+0x0/0x16c) from [<c00acb20>] (sys_mount+0xa4/0xe8)
[<c00aca7c>] (sys_mount+0x0/0xe8) from [<c0024dc0>] (ret_fast_syscall+0x0/0x2c)
r8 = C0024F44  r7 = 00000015  r6 = BEB92E85  r5 = BEB92E94
r4 = 000B1018
Code: e1a0c00d e92dd800 e24cb004 ebffffda (e5903000)
root@DNS323:~#

Last edited by dll2002dll (2009-07-25 05:40:10)

Offline

 

 

Pages: 1

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB