DSM-G600, DNS-3xx and NSA-220 Hack Forum

is the "Remove data" button removed in 1.73 web gui or I'm missing something ?

nickdns wrote:

I've removed the old transmission and installed 1.73-5, but transmission remote says:

Transmission 1.72+ (8789)  http://www.transmissionbt.com/

Is this expected?

Me too.  Any solutions?

KyleK wrote:

LuckyBlack wrote:

i have a problem with latest release....
this is the problem :
when a download has finished and I select it and press the remove button transmission daemon crashes....

this is the line of transmission.log that refers to this crash

"/ffp/bin/transmission-daemon: torrent.c: 2349: tr_torrentCheckMoveCompleted: Assertion `tr_isTorrent( tor )' failed."

Try this one and let me know how it goes. Seems the move-completed patch wrecked some havok.

Could you post an "official" 1.73 release, without 3rd party patches? I can't use 1.73 now because of this

Cirip wrote:

Hi all!
I have a problem with installing the 1.73 version.
So I have already installed 1.61-1 and work without problems.
When i try to remove it:

First I stop transmission. Next

/mnt/HD_a2# funpkg -r Transmission-1.61-1-ffp0.5.tgz
Skipping Transmission-1.61-1-ffp0.5.tgz (not installed)

But if I try to install the 1.73-5:

/mnt/HD_a2# funpkg -i Transmission-1.73-5.tgz
Skipping Transmission-1.73-5.tgz (installed: Transmission-1.61-1)

So what way can I uninstall the transmission?

At first, try these:

$ funpkg -r Transmission-1.61
$ funpkg -r Transmission-1.61-1

If it still won't remove that version, go to /ffp/var/packages. There should be a file named "Transmission-1.61-1". Delete it. Then try to install the new version again.


Alternatively, you can do this:

$ funpkg -I Transmission-1.73-5.tgz

The capital I forces funpkg to install regardless of an existing version.

grulou wrote:

Hello,

I ve a DNS-313 and I ve installed the last version of transmission, thanks for your tutorial.

I've still a problem, when I'm downloading a big file (more than 100mo) the status of the download (in percent) go up and down... and the volume downloaded too, so at time T it say that I've downloaded 63% (300mo) and a time T+5 it say 62.5% (298mo)... T+10 63.2%... T+15 62.4% ...T+20 61.9% ...  ... ...

I've installed Ctorrent and i've the same problem (and with mldonkey too) (I executed Ctorrent with the minimum memory). But Ctorrent said me that there is a hash failed on the downloaded part.

I've increased the memory dedicated to Ctorrent. and it seen to work fine now.

But I would like to use transmission, (because the interface is better ;-)). I suppose that the probleme is the same for this software and i need to allocate more memory. But How To? (or maybe there is an other solution to this problem?)

Thanks for your help, I ve made a lot of research on internet, but I didn't find anything

Best regards

Please direct your question at the forums at www.transmissionbt.com. I'm just compiling the app, I don't know too much about its internals :)

Actually, I wasn't doing anything at all. I just added a torrent and after it had been downloading for a while, crash. It was the only torrent in Transmission at the time and the seed ratio was probably close to infinite (as in, nothing).

I'll try installing the official one you just posted and see if this is any better. If I have time this weekend, I'll put on the one with the patch and see if I can get more information for you

Thanks!

edit:
Next morning, Transmission 1.73-7 still going! Works like a charm

Last edited by rb338 (2009-07-30 08:47:20)

I think the 100% CPU bug is happening again in Transmission 1.73

Last edited by lamski (2009-08-06 13:01:43)

Hmmm for some reason it's now working.  The only thing I did was load it using the transmission remote.net app.  Very strange.

Edit:

I just remembered I added the following to my settings.json

"complete-dir": "\/mnt\/HD_a2\/data\/torrents\/completed\/",
"complete-dir-enabled": true,
"completed-dir": "\/mnt\/HD_a2\/data\/torrents\/completed\/",

Now which one of those made it work i don't know, but I don't want to break it

Last edited by magnazan (2009-08-07 05:06:50)

magnazan wrote:

After blowing away my setup again and re-installing I noticed transmission wasn't moving completed torrents again WTF!!

Turns out the feature isn't in 1.73-7 sneaky kylek :p

Also Automatic  0.4.1-2 doesn't work with the above version.

Doesn't work how? I have both running here and no problems.

I can't get the btguard proxy to work on Transmission - does it even work?>

I've set my settingss.json as

“proxy”: “canada.btguard.com”,
“proxy-auth-enabled”: true,
“proxy-auth-password”: “foo”,
“proxy-auth-username”: “bah”,
“proxy-enabled”: true,
“proxy-port”: 1025,
“proxy-type”: 2,

krackpot wrote:

1.73-7 works great except for the completed directory moving. Copied the settings from magnazan. Tried changing ownership etc to no avail.

1.73-7 doesnt have the "Move After Complete" feature, because it was causing crashes for some people. It was an unofficial feature after all.

KyleK wrote:

krackpot wrote:

1.73-7 works great except for the completed directory moving. Copied the settings from magnazan. Tried changing ownership etc to no avail.

1.73-7 doesnt have the "Move After Complete" feature, because it was causing crashes for some people. It was an unofficial feature after all.

Ahh I see.  It's a pity as it works so well when it's setup.  Guess I'll be sticking with the previous version for now ;-)

I still have Clutch installed on my DNS-323 from an older incarnation of transmission. While it seems to work fine with 1.73, I'd really like to get with the times and use transmission's native web interface. What is the best way for me to drop Clutch and make this transition? FYI: I'm running funplug .05 on a DNS323 and the latest 1.08 beta firmware.

Thanks!