Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hi all,
I just heard strange noise from my DNS323,
then I logged in and performed a dmsg, then I got :
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
Info fld=0x0
end_request: I/O error, dev sda, sector 1715855770
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
Info fld=0x0
end_request: I/O error, dev sda, sector 1715855778
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
Info fld=0x0
end_request: I/O error, dev sda, sector 1715855786
raid1: Disk failure on sda2, disabling device.
Operation continuing on 1 devices
raid1: sda2: rescheduling sector 1713767320
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:0, dev:sda2
disk 1, wo:0, o:1, dev:sdb2
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdb2
raid1: sdb2: redirecting sector 1713767320 to another mirror
My hard drives are brand news,
Should I return the one which failed ?
How do I know which one is sda ?
The DNS323 front lights doesn't indicate any failure and I didn't receive any mail from my DNS to indicate disk faile (I configured and checked that feature previously)
Sylvain
Offline
Hi again,
I restarted my DNS323, here 's the log I get :
md: md0 stopped.
md: md1 stopped.
md: md0 stopped.
md: bind<sda2>
md: bind<sdb2>
md: kicking non-fresh sda2 from array!
md: unbind<sda2>
md: export_rdev(sda2)
raid1: raid set md0 active with 1 out of 2 mirrors
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ext3: No journal on filesystem on sdb4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
md: bind<sda2>
RAID1 conf printout:
--- wd:1 rd:2
disk 0, wo:1, o:1, dev:sda2
disk 1, wo:0, o:1, dev:sdb2
..<6>md: syncing RAID array md0
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
md: using maximum available idle IO bandwith (but not more than 100000 KB/sec) for reconstruction.
md: using 128k window, over a total of 974133312 blocks.
md: mdadm(pid 1730) used obsolete MD ioctl, upgrade your software to use new ictls.
Offline
Hi again,
I got my answer. I downloaded the diagnostic tool from my HDD manufacturer and ran it onto my suspected bad HD. With no surprise it failed.
I just have to replace my brand new 1 To HD !
Thanks to raid 1 I won't have to spend long hours to reconfigure all my stuff !!!!!!!!!!!!!
I just hope that my other HD won't fail til I get my replacement part from my retailer
Offline