DSM-G600, DNS-3xx and NSA-220 Hack Forum

Hi to all,

Since a week I'm unable to use my CH3SNAS for downloading with NZBget. I installed it months ago following the tutorial found at aroundmyroom.com and although I didn't understand anything about Linux, I managed to get it working.

It worked perfectly untill a week ago; suddenly I got the following error:

ERROR: NZBGetWeb could not connect to NZBGet-Server.

Possible reasons include:

NZBGet-Server is not running;
IP/Port-settings are incorrect. Check config;
Firewall is not properly configured (if nzbget-server and web-interface run on different computer).

Error-message reported by OS: Connection refused (111)

Only thing I can remember doing in that period is installing a new networkcard en repacing my CH3SNAS fan. (changing back didn't help).


I started over from scratch, with another harddrive installed in the NAS, trying to get it all working again through the tutorial I used before.
But the problem is; I can't get it to work! At the end of the tutorial I need to connect to nzbget with http://ch3snas:8000 but it won't! It can't astablish a connection......

With a lot of help of Zeroday at http://gathering.tweakers.net/forum/lis … 35062/last , I tried to find out what the problem could be......end of the story: for some reason lighttpd won't start!

I get the following when starting manually:

/ # cd /ffp/start
/mnt/HD_a2/ffp/start # sh startnzbget.sh start
WARNING: nzbget: Already running
/mnt/HD_a2/ffp/start # sh startweb.sh start
Starting /ffp/sbin/lighttpd -f /mnt/HD_a2/newsbin/conf/lighttpd.conf
/mnt/HD_a2/ffp/start # ps
PID USER COMMAND
1 root init
2 root [ksoftirqd/0]
3 root [events/0]
4 root [khelper]
5 root [kthread]
11 root [kblockd/0]
14 root [khubd]
49 root [pdflush]
50 root [pdflush]
52 root [aio/0]
51 root [kswapd0]
189 root [scsi_eh_0]
190 root [scsi_eh_1]
197 root [mtdblockd]
214 root [kcryptd/0]
215 root [kmirrord/0]
226 root [loop0]
1146 root atd
1355 root chkbutton
1362 root /sys/custom/upnp/upnp 0 CONCEPTRONIC http://www.conceptronic.net
1380 root /web/webs
1384 root fancontrol
1406 root /usr/sbin/samba/smbd -D
1410 root /usr/sbin/samba/nmbd -D
1414 root /usr/sbin/samba/smbd -D
1416 root op_server 6 6 6
1423 root -sh
1474 root lpd Waiting
1480 root inotify_upnp
1508 root crond
1513 nobody mt-daapd
1514 root mt-daapd
1515 root mt-daapd
1516 root mt-daapd
1520 root inotify_upnp
1521 root inotify_upnp
1523 root inotify_itune
1524 root mt-daapd
1529 root inotify_itune
1530 root inotify_itune
1581 root /ffp/sbin/telnetd -l /ffp/bin/sh
1605 root /mnt/HD_a2/newsbin/bin/nzbget -D -c /mnt/HD_a2/newsbin/conf/nzbg
1607 root /mnt/HD_a2/newsbin/bin/nzbget -D -c /mnt/HD_a2/newsbin/conf/nzbg
1608 root /mnt/HD_a2/newsbin/bin/nzbget -D -c /mnt/HD_a2/newsbin/conf/nzbg
1609 root /mnt/HD_a2/newsbin/bin/nzbget -D -c /mnt/HD_a2/newsbin/conf/nzbg
1610 root /mnt/HD_a2/newsbin/bin/nzbget -D -c /mnt/HD_a2/newsbin/conf/nzbg
1684 nobody /usr/sbin/samba/smbd -D
1704 root /ffp/bin/sh
1825 root ps
/mnt/HD_a2/ffp/start #

Zeroday told me lighttpd wasn't working, the question is: why not? What am I doing wrong?

I'm not much of a Linux freak, so it's a bit hocus-pocus to me......but I really need to get it working again! Is there anyone who recognizes this problem and is willing to help out?