DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2009-11-28 01:51:56
- msimon1960
- Member
- Registered: 2009-11-27
- Posts: 12
High Speed File Move
I have a DNS-323 with two disk drives.
I need to move the contents of one drive to the other. 400GB in my case -- it'll take a while using samba and it will generate a ton of network traffic.
I'm wondering if I could telnet into the NAS and issue some unix commands to have the DNS-323 do this internally without working through the network interfaces. Might be a handy technique with the large drives of today.
For instance:
Move the 'Videos' folder (and subfolders) on Volume_1 to the 'Videos' folder on Volume_2
Can it be done? If so what would the syntax look like (during a telnet session).
Offline
#2 2009-11-28 18:06:15
- bjby
- Member
- Registered: 2009-02-22
- Posts: 265
Re: High Speed File Move
http://dns323.kood.org/howto:telnet
Folders
/mnt/HD_a2/
/mnt/HD_b2/
commands:
cd -- you probably know what it does
ls --help
cp --help
good luck
Offline
#3 2009-11-30 16:12:12
- index monkey
- Member
- From: UK
- Registered: 2007-06-14
- Posts: 112
Re: High Speed File Move
mv "/mnt/HD_a2/myfoldericoluntbebotheredtofindoutaboutsoaskedanyway" /mnt/HD_b2
The quotes will take care of any spaces in filenames.
If you just type "mv" at the telnet prompt it will give you further details.
DNS-323, HW B1, 2 x 2TB WD green, fw 1.08, fun_plug 0.5, transmission, automatic, nzbget newsreader & rsync time machine backup.
Offline