DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2010-02-18 20:05:50

007james
Member
Registered: 2009-07-21
Posts: 11

Unable to access 323 ssh

After I updated the firmware to 1.08 I am unable to access the 323 using putty ssh, It lets me in as root but password is no good (access denied). I've also tried no password at all, no luck. The web interface still works as admin.... All help is appreciated

Thanks

Offline

 

#2 2010-02-18 21:53:05

Wiggs
Member
From: Canada
Registered: 2010-02-08
Posts: 9

Re: Unable to access 323 ssh

Can you Telnet into the NAS?


Wiggs
DNS-323 - 2-500GB Seagate Drives (RAID1)
Linksys WRT54GSv7 Router
Asus O!Play Air Media Center

Offline

 

#3 2010-02-18 22:32:28

Isildur
Member
From: Kiev, Ukraine
Registered: 2009-01-20
Posts: 59

Re: Unable to access 323 ssh

After firmware update you need to restore your settings to factory defaut (to avoid any unexpected errors etc.) and then manually (by hands) set all your settings to previous condition (also adding users and setting passwords for them). By default (for dns-323) there is no password for root user, so you need to connect via telnet first and set new password and after that you can access your device using ssh.

Offline

 

#4 2010-02-18 23:05:49

007james
Member
Registered: 2009-07-21
Posts: 11

Re: Unable to access 323 ssh

I was unable to telnet but after I loaded the following recovery funplug, I was okay, well, at least my 323 was okay

http://dns323.kood.org/forum/p19176-Tod … tml#p19176


Thanks for the response

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB