DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2010-06-08 22:22:03

slyght
Member
Registered: 2010-04-11
Posts: 5

dns is waking up, but why?

Apparently there's something which is constantly waking up my dns from hibernation, but I can't say what...there's nothing in transmissions queue (no upload, too), nor am I accessing the NAS myself. Is there a way to check, why the dns got waken up? Is it possible to trace a distant interface in the same network via wireshark?

Offline

 

#2 2010-06-09 00:24:53

fordem
Member
Registered: 2007-01-26
Posts: 1938

Re: dns is waking up, but why?

Start by unplugging the ethernet cable - that will allow you to determine whether it's being awoken by an internal process or access from the network.

If it is coming from the network, then yes, wireshark or another network analyser can be used to determine why - however network analysis presents challenges of it's own, for example the typical home network is built around a firewall/router with a four port switch, and this switch will not allow traffic on one port to be captured on another.

Offline

 

#3 2010-06-09 21:07:55

slyght
Member
Registered: 2010-04-11
Posts: 5

Re: dns is waking up, but why?

Seems to be an internal process. Unplugging the ethernet cable didn't help. What now?

Fyi: I have installed ffp and additionally transmission, twonky media and fanctrl

Last edited by slyght (2010-06-09 21:09:19)

Offline

 

#4 2010-06-09 21:59:18

hell0
Member
From: .de
Registered: 2008-05-13
Posts: 81

Re: dns is waking up, but why?

slyght wrote:

Seems to be an internal process. Unplugging the ethernet cable didn't help. What now?

Fyi: I have installed ffp and additionally transmission, twonky media and fanctrl

uninstall ffp or move ffp to usb


CH3SNAS firmware 1.05 with WD1000FYPS and ffp 0.5 on USB Stick

Offline

 

#5 2010-06-10 06:37:48

sorna
Member
Registered: 2010-03-02
Posts: 9

Re: dns is waking up, but why?

slyght wrote:

Seems to be an internal process. Unplugging the ethernet cable didn't help. What now?

Fyi: I have installed ffp and additionally transmission, twonky media and fanctrl

Which version of TwonkyMedia? May be it is TwonkyMedia trying to rescan the media directories (try setting the rescan value to 0).

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB