DSM-G600, DNS-3xx and NSA-220 Hack Forum

That's easy:

* Login into the webinterface and give some account the Samba rights for the root folder from the HDD (HD_a2).
* Open the Samba folder. For windows, es example: \\<NAS-IP>\
* Enable telnet: http://www.aroundmyroom.com/2008/01/03/ … ng-telnet/
* Learn to use telnet, it's a good way to debug everything, if MediaTomb won't start ;-)
* Go to http://mediatomb.cc/pages/download and download the ppce300c2 pakage.
* Extract it and upload it into a new folder at the CH3WNAS. (Example: /mnt/HD_a2/mediatomb; /mnt/HD_a2/ is the root directory of your HDD)
* Append the following code to your fun_plug file:

##################################################
#kill legacy upnp
kill -9 `pidof upnp`

# Start MediaTomb
touch /mnt/HD_a2/mediatomb.log
chmod 0777 /mnt/HD_a2/mediatomb.log
cd /mnt/HD_a2/mediatomb/
sh mediatomb.sh > /mnt/HD_a2/mediatomb.log 2>&1
##################################################

Restart the CH3WNAS. Now MediaTomb is enabled, the webinterface runs at http://<NAS-IP>:49153/. The default configuration from MediaTomb is stored at /mnt/HD_a2/mediatomb/config/config.xml - change it if you want. To change the configuration file, you must change the rights via telnet:

##################################################
chmod 0777 /mnt/HD_a2/mediatomb/config/config.xml
##################################################

The documentation for MediaTomb and the config file: http://mediatomb.cc/pages/documentation

Good luck and have fun :-)


Regards, Christian