Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hello , I haven't used the DNS-323 for sometime, so I factory reset it, put in the latest firmware and set up the ftp server. Once this device goes to power saver mode it CAN NOT be accessed, I have to turn it off.
Anyone seen this problem? should I go back down to a older FIRMWARE ?
I also gave up on the tls access that was not working, but will try again as I found out that the problem is DYNDNS somehow it's not working if you use the DYNDNS name. my buddy finally used the IP and was able to log in with TLS off. will try that and report
any and all advice welcomed.
thanks
Offline
What type of drives are you using? Maybe they don't support the power down/up.
Offline
It's a older 200gig drive, but I tought these sata drives were new enough to support such things. I got so fustrated I downloaded WinSSHD and installed it on my machine so my son can download files as needed. I'm going to keep reading in here , and see if I need to install the fun package and some script to just keep the harddrive powered up ALL the time. should be a simple thing once we know where to insert it
Offline