DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2010-11-20 17:40:48
- fabiorm76
- New member
- Registered: 2010-11-20
- Posts: 4
Telnet help
Dear all,
I'm new in the forum.
I need some help with my new 323 and 2 hd WD20EARS: as soon as I opened the hd packages I started 323 and setup all in RAID1 mode... everything was fine, but after that, I discovered that with these drives there will be problems...
So looking for solution I found a beatiful guide "Raid1 4K Alignment issue Guide".
I'm going to try to follow step by step the guide but I can't telnet from ram drive.
I've read and followed guide http://dns323.kood.org/howto:telnet, tried and re-tried with attached utelnet-kit.tar.gz settign up starttelnet.sh but nothing.
Could you hel me ?
Offline
#3 2010-11-22 21:52:44
- fabiorm76
- New member
- Registered: 2010-11-20
- Posts: 4
Re: Telnet help
I've tried one more time...
if I follow step by step the how to guide to telnet 323 I can telnet only from \NAS\Volume_1\ but if set my starttelnet.sh as the following the result is "impossible to open a connection with host on port 23...."
what I have to do?
please help a newbie
this is the my starttelnet.sh:
# improved starttelnet.sh, enabling the filesystems to be unmounted and checked, if need be.
# copy the provided components to a directory on the ramdisk
# the ramdisk is regenerated with every boot, so the copy has no lasting effects at all
# simply copy the two files over
cp /mnt/HD_a2/lnx_bin/utelnetd /sbin/utelnetd
cp /mnt/HD_a2/lnx_bin/busybox3 /bin/busybox3
# create the terminal device as usual
/bin/busybox3 mknod /dev/ptyp0 c 2 0
/bin/busybox3 chmod 0666 /dev/ptyp0
/bin/busybox3 mknod /dev/ttyp0 c 3 0
/bin/busybox3 chmod 0666 /dev/ttyp0
# make a shell link on the ramdisk
mkdir /bin/busybox3.dir/
PATH="$PATH:/bin/busybox3.dir"
ln -s /bin/busybox3 /bin/busybox3.dir/sh
# and start the Telnet service from the ramdisk as well
/sbin/utelnetd -l /bin/busybox3.dir/sh -d
Offline
#4 2010-11-23 07:38:59
- bjby
- Member
- Registered: 2009-02-22
- Posts: 265
Re: Telnet help
So you need telnet and unmount disks.
maybe this works for you. http://www.inreto.de/dns323/fsck/
You could also try to install ffp to usb-flash. You should be able to find guides for this.
Offline
#5 2010-11-23 10:24:29
- fabiorm76
- New member
- Registered: 2010-11-20
- Posts: 4
Re: Telnet help
SOLVED !!!
I am almost ashamed to publish the solution:
maybe could be useful for windows only user like me...
I was editing starttelnet.sh in notepad and this is the problem: Unix/Cygwin uses an LF character to separate lines, while DOS/Windows uses a CR LF character sequence.
So the solution is to edit starttelnet.sh in a "Vi" editor for windows !!! I googled and I found a text editor "WinVi" and that's it.
Now I can telnet...
Offline