DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2007-06-15 12:47:28
Firefly with firmware 1.04
Working (in debian etch):
Firefly server config page : http://craft.buzz.hu/files/configsrv.JPG
Start page : http://craft.buzz.hu/files/fireflysrv.JPG
Setup some smart playlists : http://craft.buzz.hu/files/smartplsts.JPG
Itunes : http://www.artist.hu/images/679212itunes.JPG
-------------------------------------------------------------------------------------------------------------------------------------------
2 x DNS-320
1 x DNS-325
Offline
#2 2007-06-15 12:54:55
- vthinsel
- Member
- Registered: 2007-05-24
- Posts: 41
Re: Firefly with firmware 1.04
Looks nice !
Will upgrading dns firmware from 1.03 to 1.04 erase all data I have on my disks (RAID+JBOD) ?
Thanks.
Offline
#3 2007-06-15 13:20:58
- richneo
- Member
- From: Singapore
- Registered: 2007-05-29
- Posts: 77
Re: Firefly with firmware 1.04
vthinsel wrote:
Looks nice !
Will upgrading dns firmware from 1.03 to 1.04 erase all data I have on my disks (RAID+JBOD) ?
Thanks.
mine is still there
2xDNS-323 ,1xDNS-313, 1xDNS-343
Offline
#4 2007-06-15 13:36:01
- keule
- Member
- Registered: 2007-03-12
- Posts: 22
Re: Firefly with firmware 1.04
Hi Craft,
what about the Standalone-Version of Firefly (without changeroot-environment)?
I'm using it currently here with Version 1.03 and I'm not allowed (by my wife :-) to kill it.
Does it work with R1.04?
Is there a way back to R1.03 if it doesn't work???
Offline
#5 2007-06-15 13:55:48
Re: Firefly with firmware 1.04
The standalone version :
Downloaded the file.
But the something wrong :
command "lnx_bin/busybox3 tar xvz -f dns_323_firefly_svn_mt-daapd-svn-1498_pa1.tar"
result ---> 1: Syntax error: word unexpected (expecting ")")
-------------------------------------------------------------------------------------------------------------------------------------------
2 x DNS-320
1 x DNS-325
Offline
#6 2007-06-15 15:24:39
- keule
- Member
- Registered: 2007-03-12
- Posts: 22
Re: Firefly with firmware 1.04
@craft
The file I downloaded wnd with ...pa1.tar.gz
Have you unzipped it before? You can tyr to untar it then using "tar cvf <filename>".
(I do not know what the option "z" does and what "-f" is for. Don't have a Linux here to check manpages..)
You could also try to open it with Winzip or Tatalcommander, just to see if the archive is intact.
Thanks for your effords so far!
regards..megakeule
Offline
#7 2007-06-15 15:42:56
Re: Firefly with firmware 1.04
Yes, i have the same file - sorry
Can not unzip in TC or with winzip
And i'm just following the instructions whats on the wiki page.
-------------------------------------------------------------------------------------------------------------------------------------------
2 x DNS-320
1 x DNS-325
Offline
#8 2007-06-15 17:39:59
- vthinsel
- Member
- Registered: 2007-05-24
- Posts: 41
Re: Firefly with firmware 1.04
Well, firefly worked with my 1.03 and it still works with 1.04. Nothing special to do.
I still have problems with my accents though..... I guess something is wrong with samba and the codepage it uses on my setup.
Any explanations on the "Language" and "Downloader" buttons of the new easysearch ?
Cheers,
Vincent.
Edit 1: I think the "Uploader" creates the Volume_1/Nas_Prog/BT/ dirs and files, for the BT client.
Last edited by vthinsel (2007-06-15 17:47:58)
Offline