DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2009-09-26 12:43:28
- neocox
- New member
- Registered: 2009-09-26
- Posts: 1
Problem with fancontrol script
Hello everybody,
I recently get a DNS 323...quite happy with it, but as I was a bit boared by the noise of the FAN that seems to be always at the max speed I've tried to installed FONZ fun_plug and the fancontrol script...I think i did everything right but when I rebooted the DNS ths fan was still at max spped. I tried to control the Temperature...and I think the problem is here:
when I enter the command temperature g, i get the message segmentation fault...
However if I try to set the fan speed to 0 to stop it (using fanspeed s command) nothing happens...the fan still speeds at max...
Have I miss something...where did I go wrong?...can someone Help me...
Thanks in advance...
Offline
#2 2010-03-14 10:36:35
- En3rGy
- Member
- Registered: 2010-03-09
- Posts: 6
Re: Problem with fancontrol script
If the problem is still present:
The usage of "temperature" to get the current temp ist
Code:
temperature g 0
Offline
#3 2010-03-14 23:32:17
Re: Problem with fancontrol script
I'm using firmware version 1.07... works very quietly without touching any script.
With earlier firmware versions fan was noisier and I had to do some modifications in scripts.
Offline
#4 2010-12-07 02:46:41
- Mizu001
- Member
- Registered: 2010-12-02
- Posts: 15
Re: Problem with fancontrol script
I just started having the same problem... I did exactly how the process is described here http://nas-tweaks.net/CH3SNAS:Tutorials … g_binaries
#temperature g
Segmentation fault
Then I stopped fanctrl, but I still get
temperature g
Segmentation fault
If I try to start fancontrol is also get Segmentation fault.
PLEASE HELP!!!!
Offline
#6 2010-12-07 18:36:20
- Mizu001
- Member
- Registered: 2010-12-02
- Posts: 15
Re: Problem with fancontrol script
Ok.... I'm done kicking myself.. 
Thanks oxygen.
Offline
#7 2010-12-21 04:24:34
- bgravato
- Member
- Registered: 2010-11-04
- Posts: 44
Re: Problem with fancontrol script
Yes, missing the '0' argument causes a seg fault...
For yet another alternative fan control script check this post I made some time ago: http://dns323.kood.org/forum/viewtopic.php?id=6072
Offline