Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hi,
I have not really messed with my DNS for a while (in terms of firmware). I do have two DNS-323's both with FW 1.07. I wanted to upgrade it as I bought some newer 2TB drives.
One is running FFP & one is stock.
I will say speed looks a little on the slow side too.
Anyway, once I SSH in, what command do I use to check the FFP version?
If its old (I suspect it is), can I just upgrade it without blowing up Rsync?
Thanks,
Rich
This is on my FFP dns
Running warmup...
Running a 200MB file write on drive y: 5 times...
Iteration 1: 10.95 MB/sec
Iteration 2: 10.98 MB/sec
Iteration 3: 11.11 MB/sec
Iteration 4: 11.03 MB/sec
Iteration 5: 11.07 MB/sec
------------------------------
Average (W): 11.03 MB/sec
------------------------------
Running a 200MB file read on drive y: 5 times...
Iteration 1: 20.14 MB/sec
Iteration 2: 20.36 MB/sec
Iteration 3: 20.23 MB/sec
Iteration 4: 20.49 MB/sec
Iteration 5: 20.43 MB/sec
------------------------------
Average (R): 20.33 MB/sec
------------------------------
Last edited by RichTJ99 (2011-01-05 21:30:21)
Offline